Applica LME5000 manual Rake continues to go through cleaning cycles Probable Cause, Solution

Page 8

Troubleshooting

Rake continues to go through cleaning cycles.

Probable Cause:

•Too much litter in the litter box is causing excess litter to collect behind the rake, preventing it from returning to home position or there is an obstacle in front at the rake. If the rake cannot move an obstacle during the cleaning cycle, the unit will go through a cleaning cycle up to five times in an attempt to clear the obstacle. If unsuccessful, the rake will return to its home position, and the green light will blink slowly (1 time per second), indicating that the rake has encountered an obstacle

it cannot move.

Solution:

1.Press the ON/OFF button to turn unit OFF.

2.Clear the obstacle.

Be sure litter in tray is just below the Full Line. Use the LitterMaid® triple- action tool to measure the level of the litter in the center of the unit. Full Line will not be visible if tray is overfilled.

3.Press the ON/OFF button ON.

4.The rake will run through a complete cleaning cycle. When cycle is finished, the unit is ready for use.

Unit does not operate 10 minutes after cat leaves.

Probable Cause:

• Dusty sensors (Sensors need to be covered for 5 seconds to activate.)

Solution:

1.Wipe each sensor with a soft, dry cloth.

2.Press the ON/OFF button to turn unit OFF.

3.Press the ON/OFF button ON.

4.Unit will run through a cleaning cycle.

Unit does not completely clean litter box.

Probable Cause:

• Low-quality clumping litter.

Solution:

1.Do not use non-clumping, crystal or pearl-like litter.

2.Use only premium clumping litter.

Unit does not operate when you press ON/OFF button to turn unit ON.

Probable Cause:

•Power outage

•Faulty or non-activated outlet

•Old batteries

Solution:

•Check batteries and outlet

•Use batteries in case of power outage

•Switch to battery power

Probable Cause:

•Incorrectly installed or dead batteries. (Batteries should only be used as backup.) Change the batteries once yearly.

Solution:

1.Press the ON/OFF button OFF.

2.Open battery compartment; check to see that batteries are correctly installed.

3.Press the ON/OFF button ON. The unit should perform a whole cleaning cycle.

4.If unit does not operate, replace batteries with fresh ones and try again.

13

14

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model LME5000 Important Safeguards Accessories Product may vary slightly from what is illustratedSetup Instructions Optional itemsAssembly Install carbon filterOpened to remove and install top housing Lift top housing. Angle into position bracket end of topLED operation, function and why they blink To empty and clean litter tray Rake Removal & Cleaning Removing the rakePaw-Cleaning Ramp Optional item Sensor CoversUnit does not completely clean litter box Probable Cause Rake continues to go through cleaning cycles Probable CauseSolution If the rake is stuck in the center or dumping position Power light blinks slowly and continuously Probable CausePower light blinks quickly Probable Cause If green ionize LED is off Solution How do you get service?What does your warranty not cover? How does state law relate to this warranty?WIN

LME5000 specifications

The Applica LME5000 is a cutting-edge device specifically designed to enhance operational efficiencies across various industries. This innovative solution integrates state-of-the-art technologies that streamline processes, reduce manual intervention, and promote seamless integration within existing systems.

One of the standout features of the LME5000 is its robust automation capabilities. By leveraging advanced algorithms and machine learning, the device can analyze vast amounts of data and make real-time decisions. This feature not only minimizes human error but also accelerates production and enhances overall productivity by enabling quick response times to operational changes.

The LME5000 boasts a user-friendly interface that simplifies navigation and operation. With its intuitive design, even those with minimal technical expertise can operate the device efficiently. Training times are drastically reduced, allowing organizations to deploy the technology rapidly and maximize ROI.

Connectivity is another key characteristic of the LME5000. Equipped with various communication protocols, including Wi-Fi, Bluetooth, and Ethernet, it facilitates easy integration with other smart devices and systems. This interoperability ensures that organizations can maintain an interconnected ecosystem, allowing them to gather insights and optimize operations based on comprehensive data analysis.

Another critical aspect of the LME5000 is its adaptability to different environments and industries. Whether utilized in manufacturing, logistics, or warehousing, the device can be tailored to meet specific operational requirements. This versatility not only increases its utility across sectors but also represents an economical investment for businesses looking to future-proof their operations.

The Applica LME5000 also prioritizes security and data integrity. With built-in cybersecurity features, organizations can trust that sensitive data is well protected from potential threats. This assurance allows companies to leverage the power of data without compromising their security protocols.

In conclusion, the Applica LME5000 is an innovative solution that embodies cutting-edge automation, user-centric design, connectivity, adaptability, and robust security. By implementing this technology, organizations can drive efficiency, reduce costs, and maintain a competitive edge in a rapidly evolving market landscape. Embracing the LME5000 is a strategic step towards achieving operational excellence and ensuring sustainability in today's dynamic business environment.
Top Page Image Contents