Bissell 66T6 warranty Emptying the dirt cup, Cleaning the pre-motor filter, 169

Page 9

Maintenance and care

2.

 

Emptying the dirt cup

1.Turn vacuum OFF ( ) unplug the vacuum from electrical outlet.

2.Open the dirt cup compartment by lifting up the door latch on the front of the vacuum.

3.Lift the dirt cup assembly out from the vacuum.

4.Remove the top cover from the dirt cup assembly by unfastening the latch, raising the front edge and removing the top cover from the rear hinges. Set the top cover aside.

5.Empty the dirt into a garbage container.

6.To reattach the top cover on the dirt cup, align the slots on the top cover with the hinges on the dirt cup and rotate the front cover down to the closed position. Then fasten the latch.

7.Place the dirt cup back into the vacuum.

8.Close dirt cup compartment door and press down gently until it locks into place.

NOTE: The compartment door will not close without the dirt cup in place.

Cleaning the pre-motor filter

The pre-motor filter protects the motor from dirt and dust particles.

1.Turn vacuum OFF ( ) unplug the vacuum from electrical outlet.

2.Open the dirt cup compartment by lifting up the door latch on the front of the vacuum.

3.Remove the filter frame from the filter holder by grasping the lip of the frame and pulling up.

4a.4b.

6.

WARNING: To reduce

the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or trouble- shooting checks.

NOTICE:

This product is intended for household use only and not for commercial or industrial use. Vacuuming of dust from products like plaster, concrete or ashes will damage the motor and void the warranty.

Washable Pre-

Motor Filter

3.

4.Remove the filter from the filter frame and clean by hand washing in warm water. A mild detergent can be used if desired. Allow the filter to air dry completely before replacing.

5.Place the filter back into the filter frame and replace back into the filter holder.

NOTE: The filter frame should be placed so the protective frame is visible.

6.Replace the dirt cup back into the dirt cup compartment.

7.Close dirt cup compartment door and press down gently until it locks into place.

w w w . b i s s e l l . c o m

WARNING:

Do not operate cleaner with damp or wet filters or without all filters in place.

Tip:

For maximum cleaning performance, check the

 

filters often and clean or replace if necessary.

169

8 0 0 . 2 3 7 . 7 6 9 1

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Pet Hair Eraser W w . b i s s e l l . c o m 0 3 7 6 9 Important Safety Instructions Pet Hair Eraser Power ControlButton Floor Nozzle AttachmentOnce assembled, you can store your TightenVacuum in one of two positions Storing in the in-use positionPower cord Power buttonPower Button Automatic cord rewindPet Hair Eraser Floor Nozzle Special toolsVariable suction power control Clean filter indicatorAir flow regulator Cleaning the pre-motor filter Emptying the dirt cup169 Replace the post-motor Hepa media filter with a new filter Replacing the post-motor Hepa media filterCyclone Chamber Opening Clearing clogs from the dirt cupMaintaining the Wide Pet TurboBrush Thank you for selecting a Bissell product M. 10 p.m. ET Or writePO Box 203-7257 203-7289 Dirt Cup Assembly 203-7259203-7256 203-7265 Upholstery Brush 203-7266Use the Customer Services tab Warranty Bissell Pet Hair Eraser Cyclonic Bagless Canister
Related manuals
Manual 16 pages 25.95 Kb

66T6 specifications

The Bissell 66T6 is an innovative deep cleaner designed to tackle tough carpet stains and refresh your carpets with ease. This versatile machine combines powerful cleaning capabilities with user-friendly features, making it a go-to solution for homeowners who prioritize cleanliness and convenience.

One of the standout features of the Bissell 66T6 is its Dual DirtLifter PowerBrushes. These rotating brushes work in tandem to penetrate deep into carpet fibers, effectively loosening and lifting dirt, grime, and stains. The design ensures that the cleaning solution reaches every inch of the carpet, providing a thorough clean that is often impossible with standard vacuuming alone.

Equipped with the Heatwave Technology, the Bissell 66T6 is capable of maintaining consistent water temperature throughout the cleaning process. This technology ensures that the cleaning solution remains warm, enhancing its effectiveness in breaking down stubborn stains and oils. Warm water helps to dissolve tough messes, making cleaning more efficient and resulting in better outcomes.

Another notable characteristic is the Express Clean Mode, which allows users to clean and dry carpets in a significantly reduced time frame. This setting is particularly beneficial for households with children or pets, as it means that carpets can be refreshed quickly, minimizing downtime and inconvenience. In just about 30 minutes, carpets can be left clean and ready to use again.

The Bissell 66T6 also features a large, easy-to-fill water tank, which reduces the frequency of refills during cleaning sessions. The two-tank system keeps clean and dirty water separate, ensuring that you are always using clean solution while cleaning your carpets. Additionally, the lightweight design of the machine makes it easy to maneuver, even in tight spaces.

Lastly, the Bissell 66T6 comes with a range of specialized cleaning tools designed for various surfaces and cleaning challenges. With tools like the tough stain tool and the upholstery tool, users have the flexibility to clean more than just carpets. From area rugs to stairs and upholstery, this deep cleaner provides a comprehensive approach to home cleaning.

Overall, the Bissell 66T6 is a powerful, efficient, and user-friendly deep cleaner that offers a multitude of features tailored for effective stain removal and carpet maintenance. Whether you're dealing with pet messes, spills, or general dirt accumulation, the Bissell 66T6 stands out as a reliable choice for maintaining a clean and beautiful home.
Top Page Image Contents