General Information

K5942V2 7/04

5894PI

PASSIVE INFRARED MOTION DETECTOR/TRANSMITTER

INSTALLATION INSTRUCTIONS

The 5894PI Passive Infrared Motion Detector/Transmitter is a 10-year battery- operated wireless device intended for use as part of a 5800 series wireless alarm system.

Designed for use in commercial and residential installations, the 5894PI is a wall-mounted unit with a standard lens that provides wide-angle protection up to a range of 35 ft (10.6m). For best coverage, mount the detector so that the likely direction of intruder motion is across the pattern.

When installed per the guidelines, the Tier- Balanced Optics technology in the 5894PI provides false alarm protection against pets and other animals up to 80 lbs.

This document provides installation instructions for the 5894PI, but the installer must be familiar with the installation instructions for the 5800 Wireless Alarm System with which the 5894PI is intended to be used.

FEATURES

•Tier-Balanced Optics provides pet immunity against animals up to 80 lbs.

•Wireless operation for fast installation.

•Dual-element pyroelectric sensor provides positive protection while minimizing false alarms.

•Selectable PIR sensitivity.

•Provision to turn LED on while Walk Testing (LED is turned off after testing).

•Tamper-protected cover and wall; detector transmits message if cover or detector is removed.

•Wall or corner mounting options.

•Patented Black Bug Guard.

•Temperature compensation.

SYSTEM DESCRIPTION

Optical System

The 5894PI uses efficiently designed Fresnel lenses with Tier-Balanced Optics.

Radio Transmitter

The built-in transmitter serves only as the communication link to the alarm system's Receiver/Control, and can send alarm, tamper, supervisory, and battery status messages to the system's receiver/control. The transmitter is not used for detection purposes. Each detector has a unique ID code permanently assigned at the factory. You must enroll this ID into the control system at the time of installation. This allows each detector used in the system to be uniquely identified. You must program the control to enroll the 5894PI as an "RF" type unit (i.e., supervised RF).

To conserve battery life during normal operation, no more than one transmission sequence will occur within a 3-minute period. There is no such time restriction in Test mode (refer to the Walk Test section).

SPECIFICATIONS

Pet Immune Lens:

35 ft x 45 ft (10.6m x 13.7m).

28 zones (8 over, 8 long range, 8 intermediate,

4 short-range).

Pulse Processing:

Intermediate, Standard, or Harsh, Installer- selectable. Note: For pet immune applica- tions, see Special Instructions for Installations with Pets on page 3.

Detectable Walk Rate: 0.5–10 ft/Sec (0.15–3m/Sec).

Mounting Height:

7.0 ft (2.1m)

Walk Test Indicator:

Red LED with enable/disable link.

Batteries:

Three 3-volt Lithium batteries. Use only ADEMCO No. 466, Duracell DL123A, Panasonic CR123A, Sanyo CR123A, or Varta CR123A.

0perating Temperature:

32°F – 122°F (0°C - 50°C).

Operating Humidity:

Up to 95% RH (max.), non-condensing.

Dimensions: 3.0"W 5.0"H x 1.7"D

(76.3mm x 127.0mm x 42.6mm).

Approvals/Listings:

FCC, IC, cULus, C-Tick

TOP VIEW

22.5'
0
22.5'
10'	20'	30'	35'

	ALTERNATE
	COUNT POLARITY
	EACH ZONE CONSISTS
SIDE VIEW	OF 2 FIELDS
SIDE VIEW

7'
0	10'	20'	30'	35'
0

Figure 1. Protection Pattern

BATTERY ACTIVATION/INSTALLATION

1.Remove front cover by pressing the front cover latch and lifting the cover off. See Figure 2.

Figure 2. Remove the Front Cover

2.To activate the installed batteries, remove the battery pull-tab. (See Figure 3.) Make sure the batteries remain firmly seated in the battery holders.

Figure 3. Remove Pull Tab to

activate batteries

3.To replace the batteries, remove the old batteries from the holder. Then, observing correct polarity, install three new Lithium batteries into the battery holders, as shown in Figure 4. Make sure the batteries are firmly seated.

4.Replace the cover (snap fit).

Battery Caution

Risk of fire, explosion, and burns. Do not recharge, disassemble, heat above 100°C, or incinerate. Dispose of used batteries promptly. Keep away from children.

Page 1

5894PI specifications

The Honeywell 5894PI is a state-of-the-art Passive Infrared (PIR) motion detector designed to enhance the security of residential and commercial properties. Renowned for its reliability and performance, the 5894PI is part of Honeywell's advanced line of security solutions that leverage cutting-edge technology for optimal functionality.

One of the main features of the Honeywell 5894PI is its enhanced PIR sensor, which utilizes sophisticated algorithms to differentiate between human movement and other environmental factors. This capability significantly reduces false alarms triggered by pets or small animals, making it an ideal choice for pet owners. The detector's adjustable sensitivity settings allow for customization according to specific needs and installation environments, ensuring that it performs optimally under varying conditions.

The Honeywell 5894PI incorporates dual-element sensor technology, which improves the detection range and accuracy of the device. With a detection range of up to 40 feet, it offers extensive coverage for large areas. The sensor also has a high-impact resistant housing, making it suitable for both indoor and outdoor environments.

Installation of the 5894PI is straightforward, featuring an easy-to-mount design that allows for flexibility in placement. Homeowners and security professionals can quickly integrate the device into existing security systems. The detector is compatible with multiple Honeywell panels, such as the Vista series, enabling seamless interaction with other security components.

Another remarkable characteristic is its robust battery management system. The 5894PI features long-lasting battery life, which minimizes the need for frequent replacements. This is especially beneficial for users looking for a low-maintenance solution for their security needs. The device also has a tamper switch that notifies the user in case of unauthorized removal from the mounted location.

Furthermore, the Honeywell 5894PI uses advanced technology to operate efficiently even in varying temperatures, making it a reliable choice in different climatic conditions. Overall, the Honeywell 5894PI stands out as a reliable and technologically advanced motion detector, providing peace of mind for users by effectively safeguarding their properties against unauthorized access. Its combination of smart features, user-friendly installation, and high performance makes it an exceptional choice in the realm of security solutions.