General Information, Mounting | Honeywell 5800ZBRIDGE instruction

800-08932 5/11 Rev. A

5800ZBRIDGE

Z-Bridge Module

INSTALLATION AND SETUP GUIDE

GENERAL INFORMATION

5800ZBRIDGE is a wireless, intelligent energy management device that provides an interface between Z-Wave Modules and Honeywell LYNX Security Systems and VISTA Control Panels that are equipped with RF keypads.

Note: The 5800ZBridge is not compatible with the 5800TM or 5883H modules.

Features

•Automatically set back Z-Wave enabled thermostat when security system is Armed AWAY.

•Automatically turns lights off when security system is Armed AWAY.

•Sends run command to Z-Wave enabled thermostat when security system is Disarmed.

•Automatically turns lights on when security system is Disarmed.

•Alarm Status light: Ready, Armed Away and Stay.

•Will function with any Z-Wave device

MOUNTING

1.Determine the optimum mounting location taking care to avoid damp locations. To maximize the transmitter’s range, avoid mounting the device to metal objects, if possible. The module should be located a maximum of 6 feet from an unswitched 120VAC outlet.

2.Open the 5800ZBRIDGE case as shown in Figure 1.

3.Mount the 5800ZBRIDGE using the provided screws. (Refer to Figure 2)

5800Z-002-V0

Figure 1. Opening the 5800ZBRIDGE

POWER UP MODULE

1.Plug in 12VDC power supply, LED flashes ORANGE 3 times and then goes out. (Refer to Figure 2)

PROGRAMMING

Enroll 5800TM Code into Module

1.Press SW5 LEARN switch for 1 second and release. LED will begin flashing ORANGE.

2.Disarm or Arm the control panel (with 5800TM code turned on). The LED will stop flashing ORANGE and the color will follow status of the control panel.

Note: The module will time out of program mode after 3 minutes if no TM code is enrolled.

Table 1 - 5800ZBRIDGE LED Indications

Indication	Meaning
Flashing Red	Armed AWAY
Steady Red	Armed STAY
Solid Green	Ready
Flashing Orange	ALARM/Panic

Note: Following an alarm, the User Code must be entered twice and the keypad must go to ready in order for the Z-Bridge Module to release thermostat setback and/or turn on lights.

Enroll (include) Devices in Z-Wave Modules into 5800ZBRIDGE module

1.Press the corresponding switch (SW1 through 4) for 1 second and release for any combination of four Thermostats or Lights. (Refer to Figure 2)

2.The 5800ZBRIDGE LED will begin flashing Green.

3.Press button on the respective Z-Wave device to learn (include) the device. The 5800ZBRIDGE LED will stop flashing GREEN and return to status of control panel.

4.Repeat for each Z-Wave device as applicable.

Note: The module will time out of program mode after 2 minutes if no Z-Wave device in enrolled (included).

Reset 5800ZBRIDGE Module

1.Disconnect the 12VDC power supply.

2.Press and hold SW5 LEARN switch and then plug in 12VDC power supply. LED flashes Orange 5 times and then goes out.

3.Release switch SW5. TM code has been deleted and 5800ZBRIDGE has been deleted (excluded) from the Z-Wave network.

- 1 -

5800ZBRIDGE specifications

The Honeywell 5800ZBRIDGE is an innovative solution designed to enhance the capabilities of security systems by bridging wired and wireless components. This versatile device is particularly useful for homeowners and businesses looking to integrate legacy wired sensors into modern wireless systems seamlessly.

One of the main features of the 5800ZBRIDGE is its ability to support a wide array of wired sensors. It allows for the integration of devices such as door/window contacts, motion detectors, and glass break sensors, which can be incorporated into Honeywell's wireless ecosystem. This capability helps users preserve their existing security investments while upgrading to the latest technology, minimizing the need for extensive rewiring and reducing installation costs.

The 5800ZBRIDGE operates using advanced wireless technology, specifically Honeywell's 5800 series protocol, which is known for its reliability and robustness. With a power range that can effectively cover large areas, the device provides strong communication between the sensors and the control panel. This ensures that alerts and notifications about potential security breaches are promptly delivered, enhancing the overall security of the space being monitored.

Moreover, the device features a straightforward installation process. It is designed for easy configuration, allowing users to quickly connect their wired sensors to the system without extensive technical knowledge. This plug-and-play functionality is a significant advantage for DIY enthusiasts who prefer to install their own security systems without professional assistance.

Another notable characteristic of the Honeywell 5800ZBRIDGE is its compatibility with various Honeywell security panels, including the popular Lyric Controller and the older Vista series. This compatibility not only amplifies the versatility of the system but also ensures that users can upgrade their security setup without having to invest in entirely new equipment.

In terms of power, the 5800ZBRIDGE is powered by a reliable AC adapter, ensuring consistent and uninterrupted operation. Additionally, it is designed with energy efficiency in mind, minimizing power consumption while maintaining high performance.

Overall, the Honeywell 5800ZBRIDGE is an impressive component that bridges the gap between wired and wireless systems. Its strong compatibility, ease of installation, and support for a wide range of wired sensors make it an essential tool for anyone looking to modernize their security setup. With the 5800ZBRIDGE, homeowners and businesses can enjoy heightened security without sacrificing existing infrastructure.