Squeezebox™ Owner’s Guide
Configuring Squeezebox
When you plug in Squeezebox, a logo is displayed briefly, followed by a welcome message.
Set Up Networking
1.Press the RIGHT arrow on the remote control. The Set Up Networking menu option is displayed.
2.Press the RIGHT arrow to enter networking setup.
3.Choose whether you want to connect Squeezebox to a wireless or wired network by pressing the up and down arrows on the remote. When you have made your selection, press the RIGHT arrow.
4.Squeezebox asks you for your local region or country. Scroll using the down arrow on the remote until you find the local region. Press the right arrow to select your region.
Note: Failure to select the appropriate region may violate local laws.
5.Squeezebox will scan to find your wireless network. Select your network name (SSID) and press the right arrow.
If you are in an area where there are multiple wireless networks, you can scroll down using the remote until you find the one you want to use. If your router is not broadcasting your network name, you will need to select “Enter a network name”.
Tip: You can use the number buttons on the remote to enter text as you might on a cell phone. Use the ADD button on the remote as a backspace and the PLAY button to insert a letter.
6.If your network is secured with WEP or WPA encryption, you’ll need to enter the network password or key using the numbers and letters on the remote and press the right arrow. If your network supports more than one type of encryption at a time or is not broadcasting its SSID, Squeezebox may ask you to choose your encryption method first.
Tip: WEP keys consist of a string of ten or
Squeezebox connects to your wireless network. If Squeezebox does not connect