Sansui HDLCD1900 owner manual Pos, Clock, Phase, Auto adjust, Setting

Picture control adjustment in the Component and PC mode

You can adjust to optimize the performance of the TV in the Component and PC mode.

NOTE:

•If no buttons are pressed for more than approx. 30 seconds, the Menu- screen will return to normal Monitor- screen automatically.

•The “Component Set” and “PC Set” settings are not effective for normal mode, or other input modes.

Example: Adjust the H-Pos in the component mode.

1 Press INPUT SELECT repeatedly to select the component

	mode.				￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
2	component mode. Then press
	Press MENU during the
	▲ or ▼ to select “Feature”
	menu, then press .				￿￿￿￿￿￿	￿￿￿￿￿	￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿
3	Press ▲ or ▼ to select				￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	“Component Set”, then press
	or ENTER.				￿￿￿￿￿￿	￿￿￿￿￿	￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿
4 Press ▲ or ▼ to select
			H-Pos			48
			C o m p o n e n t s e t t i n g - 7 2 0 x 4 8 0 p @ 6 0 / 5 9 . 9 4 H z
	“H-Pos”, then press	or	V-Pos			48
	ENTER.		Clock			50
			Phase			51
			Auto adjust
			Setting					Preset
					To Move Enter To Select Menu To Exit
5 Press or to adjust the
	setting.
				H-Pos				56
	H-Pos:
		To adjust the horizontal position of the
	V-Pos:	image on the PC Monitor-screen.
		To adjust the vertical position of the
	Clock:	image on the PC Monitor-screen.
		To minimize any vertical bars or stripes
	Phase:	visible on the screen background.
		This must be adjusted after the frequency
		of your PC has been set to 60hz to
	Auto adjust	optimize pic ture quality				(page 16).
	(PC Setting only): To optimize “H-Pos”, “V-Pos”, “Clock”
		and “Phase” automatically.
	Setting:	To return your settings to the factory
		settings.

6 Press MENU to return to the normal screen.

39