Or release toxic Materials | Troy-Bilt 440 specification

Maintaining

Your Lawn

Mower

WARNING

Batteries contain sulfuric acid which may cause burns. Do not short circuit or mutilate batteries in any way. Do not put batteries in fire as these may burst

or release toxic

materials.

The battery contains corrosive fluid and toxic material; handle with care and keep away from children. Do not puncture, disassemble, mutilate or incinerate the battery. Explosive gases could be vented during charg- ing or discharging. Use in a well venti- lated area, away from sources of ignition.

Use only the battery charger supplied with this mower.

Replacing Battery (If Equipped)

WARNING: Batteries contain sulfuric acid which may cause burns. Do not short circuit or mutilate batteries in any way. Do not put batteries in fire as these may burst or release toxic materials.

1.Loosen star knobs securing upper and lower handles and carefully fold the upper handle down toward the lower handle as shown in Figure 5-6.

2.Remove the two screws securing battery cover to battery housing and place them to the side. See Figure 5-6.

3.Open battery cover, remove positive and negative leads from battery, remove and replace with new battery. Connect the positive lead to the positive side of the battery pack, then connect the negative side.

NOTE: The battery you have may differ slightly from the one shown in Figure 5-7. Refer to the Parts List.

IMPORTANT: When replacing battery pack in handle panel, battery pack must be positioned with the positive terminal to the left side and the negative terminal to the right side of panel (Positive terminal is closest to the key switch). See Figure 5-7. Replacing battery pack incorrectly will cause serious damage.

4.Reattach battery cover to battery housing by secur- ing with the two screws removed earlier, making sure to snap the wire conduit on the left into place on the housing.

5.Fold handles back up and tighten star knobs.

Charging Battery (If Equipped)

WARNING: The battery contains cor- rosive fluid and toxic material; handle with care and keep away from children. Do not puncture, disassemble, mutilate or incinerate the battery. Explosive gases could be vented during charging or discharging. Use in a well ventilated area, away from sources of ignition.

NOTE: The special designed plug on the charger will only fit into the plug on the battery box.

1.Plug the battery charger into the port on the underside of the battery housing. See Figure 5-8.

2.Insert the battery charger plug into a standard 120 volt household outlet. Charge battery for 8 to 10 hours before initial use. Do not charge longer than 12 hours. The battery should only need to be charged upon initial setup and after any other extended periods of non-use.

3.After charging, disconnect charger plug from outlet first, then disconnect charger lead from battery.

Figure 5-6

Figure 5-7

Figure 5-8

IMPORTANT: Do not remove the battery pack from the electric starter housing for any reason other than replacement.

IMPORTANT: Always plug charger lead into battery pack lead first, and then insert battery charger plug into 120 volt standard household outlet. Follow this order of action every time you charge the battery.

440 specifications

The Troy-Bilt 440 is a powerful and versatile lawn mower designed to meet the needs of both residential and commercial users. With its robust build and advanced features, it caters to homeowners with large yards as well as professional landscapers seeking reliability and efficiency in their equipment.

One of the standout features of the Troy-Bilt 440 is its reliable and efficient engine. Powered by a high-performance engine, it provides ample power to tackle even the toughest mowing tasks. The engine is designed for quiet operation while offering enough torque to handle thick grass and uneven terrain with ease. This enhances the mowing experience, allowing users to focus on achieving a well-manicured lawn without the noise typically associated with heavy-duty mowers.

The Troy-Bilt 440 is equipped with a wide cutting deck, allowing for a broader mowing path. This feature significantly reduces mowing time and increases productivity, making it ideal for larger properties. The cutting deck also employs a multi-blade system, which ensures a clean and precise cut. Users can also adjust the cutting height easily, providing flexibility to customize the grass length according to personal preference.

Another defining characteristic of the Troy-Bilt 440 is its innovative technologies. The mower features a self-propelled drive system, enabling users to maintain a consistent pace without the need for excessive physical effort. This not only minimizes fatigue during extended mowing sessions but also enhances maneuverability, making it easier to navigate around obstacles, flowerbeds, and garden paths.

The Troy-Bilt 440 also prioritizes user comfort and convenience. A cushioned seat, ergonomic controls, and easy-to-reach levers contribute to a user-friendly experience. Additionally, the mower includes ample storage options for tools and accessories, enhancing the overall practicality of the design.

Furthermore, maintenance of the Troy-Bilt 440 is straightforward due to its accessible engine and components. Routine tasks such as oil changes, air filter replacements, and blade sharpening can be performed with minimal hassle, ensuring the mower stays in top condition for years to come.

In conclusion, the Troy-Bilt 440 combines power, efficiency, and user-friendly features into an impressive lawn mower. Its exceptional engineering, advanced technologies, and thoughtful design make it a valuable investment for anyone serious about lawn care. Whether for residential upkeep or professional landscaping, the Troy-Bilt 440 stands out as a reliable and high-performing mower that meets a variety of mowing needs.