Whirlpool ACE184XD0 Using the exhaust vent control, Changing air direction, To exhaust room air

Page 6

Using the exhaust vent control

The Exhaust Vent Control draws stale or smoky air from the room or circulates existing room air.

To exhaust room air:

1.Set Exhaust Vent Control to OPEN.

2.Set Selector Control to desired setting (COOL, HEAT, or FAN ONLY).

3.Set Fan Control to desired setting (ENERGY SAVER or NORMAL FAN).

4.Set Thermostat Control to desired setting.

To circulate room alr:

1.Set Exhaust Vent Control to CLOSED.

2.Set Selector Control to desired setting (COOL, HEAT, or FAN ONLY).

3.Set Fan Control to desired setting (ENERGY SAVER or NORMAL FAN).

4.Set Thermostat Control to desired setting.

NOTE: For maximum performance, the Exhaust Vent Control must be in the CLOSED position when cooling or room air circulation is desired.

Changing air direction

The air direction cartridges on both sides of the unit control the direction of the cooled air. The air direction cartridge rotates to direct the air straight ahead or to the sides of the unit. The louvers in each air direction cartridge are operated by a tab. Use the tab to direct the air up, down, or straight ahead.

6

Image 6
Contents UseAndCare Thank you for buying a Whirlpool@ appliance Please record your model’s informationAir Conditioner Safety Your safety is important to usHelp us help you Parts and Features Using the energy saver settings Starting your air conditionerTo exhaust room air Using the exhaust vent controlChanging air direction To circulate room alrCleaning the front panel Caring for Your Air ConditionerElectrical Shock Hazard Cleaning the slide-out air filter Performing annual maintenanceFilter is cleanable. a clean filter helps Saving energy Unlt blows fuses or trips circuit breaker Unlt turns on TroubleshootingNormal operating sounds Or does not cool/heat the roomReauestina Assistance or Serbice If you need serviceIf you are not satisfied with how the problem was solved Lf you need assistanceIndex WHIRLPOOL@’