Whirlpool ACE184XR0 manual Mode, Fan Speed, Filter Monitor, Temperature

Page 12

NOTES:

■When the air conditioner is off, the Room indicator light is lit and the display shows the current room temperature.

■If the room temperature is below 55ºF (13ºC), the display will show 55ºF (13ºC). If the room temperature is above 99ºF (37ºC), the display will show 99ºF (37ºC).

■When the Set indicator light is lit, the display shows the temperature control setting. See “Temperature.”

■When the Hour indicator light is lit, the display shows the time remaining on the Timer setting. See “Timer Delay.”

1.Remove clear protective film from control panel and front panel badge (on some models).

2.Press POWER to turn on air conditioner.

NOTE: When air conditioner is turned on for the first time

after it is plugged in, it will display the default settings: Cool mode, Turbo fan speed, 72°F (22°C) for 3 seconds. When it is turned on at all other times, it will display the previous settings for 3 seconds, and then display the room temperature.

3.Select mode. See “Mode.”

4.Select fan speed. See “Fan Speed.”

5.Set temperature. See “Temperature.”

Mode

1.Press MODE until you see the indicator light come on for the setting you desire.

2.Choose Auto, Cool, Fan Only or Power Saver.

■Auto—Cools room while it automatically controls fan speed. You cannot change fan speed, but you can adjust temperature by pressing the plus or minus button.

■Cool—Cools room. You can adjust temperature by pressing the plus or minus button. You can select fan speed by pressing FAN SPEED.

■Fan Only—Only the fan runs. You can select the fan speed by pressing FAN SPEED, but you cannot adjust the Temperature control setting. Display shows the current room temperature.

■Power Saver—Fan runs only when cooling is needed. You can select the fan speed by pressing FAN SPEED.

Because the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often. Use Power Saver when you are asleep or away from home.

Fan Speed

NOTE: The Fan Speed button will operate only when Cool, Fan Only or Power Saver mode has been selected.

1.Press FAN SPEED until you see the indicator light come on for the setting you desire.

2.Choose Turbo, High or Low.

Filter Monitor

1.When Filter indicator light is lit or flashing, remove, clean and replace air filter. See “Cleaning the Air Filter.”

2.Press and hold FILTER for 3 seconds after cleaning and replacing the air filter. This resets the Filter Monitor.

NOTE: After 360 hours of fan operating time, the Filter indicator light will turn on. It will remain on for 180 hours or until you press FILTER. After 180 hours, it will flash. It will continue flashing until you press FILTER.

Temperature

■Press the plus button to raise the temperature. Room indicator light will turn off, and Set indicator light will turn on. Display shows the Temperature control setting. Each time you press or hold the plus button, the temperature will increase 1º until it reaches 86°F (30°C).

NOTE: After 3 seconds, Set indicator light will turn off, and Room indicator light will turn on. Display will show the current room temperature.

■Press the minus button to lower the temperature. Room indicator light will turn off, and Set indicator light will turn on. Display shows the Temperature control setting. Each time you press or hold the minus button, the temperature will decrease 1º until it reaches 64°F (18°C).

NOTE: After 3 seconds, Set indicator light will turn off, and Room indicator light will turn on. Display will show the current room temperature.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents AIR Conditioner 1188127ATable of Contents AIR Conditioner SafetyÍndice Installation Requirements Tools and PartsLocation Requirements Window installation Electrical RequirementsInstallation Instructions UnpackingInstalling the Cabinet in a Window Filler board installationShipping bracket removal on some models Foam block installation Top ViewOutside View Level cabinet Secure cabinet to windowInstalling the Cabinet Through a Wall Installing cabinet into wood frameInstalling wood frame Option 1-Wood, metal or plastic moldingComplete Installation AIR Conditioner USE Starting Your Air Conditioner Digital ControlTemperature ModeFan Speed Filter MonitorTo change the temperature display from F to C Timer delayTo clear Timer delay program To select the modeTo raise the temperature To lower the temperatureStarting Your Air Conditioner Rotary Controls Vent Control on some modelsStyle 1-Cool only air conditioner settings Fan Control AIR Conditioner Care Troubleshooting Air conditioner blows fuses or trips circuit breakersAir conditioner seems to run too much Assistance or Service AccessoriesSeguridad DEL Acondicionador DE Aire Requisitos DE InstalaciónHerramientas y piezas Herramientas necesariasRequisitos de ubicación Piezas suministradas en algunos modelosInstalación en la ventana Requisitos eléctricos Método recomendado para la puesta a tierraCable de suministro de energía Instrucciones DE Instalación DesempaquePara poner a prueba el cable de suministro de energía Quite los materiales de empaqueInstalación del gabinete en una ventana Remoción del soporte de transporte en algunos modelosInstalación del tablero de llenado Instalación del bloque de espuma Vista superiorNivele el gabinete Instalación del gabinete a través de La pared Asegure el gabinete a la ventanaOpción 1-Adorno de madera, metal o plástico Opción 2-Pared de yeso sin adornoInstalación del marco de madera Instale el gabinete dentro del marco de maderaPara completar la instalación NivelUSO DE SU Acondicionador DE Aire ImportanteMode Modo Fan Speed Velocidad de ventilaciónMonitor del filtro Temperatura Para cambiar la pantalla de la temperatura de F a CPara ver o cambiar el tiempo restante en horas Para subir la temperatura Para encender o apagar el acondicionador de airePara seleccionar el modo Para bajar la temperaturaControl de ventilación en algunos modelos Cómo cambiar la dirección del aire Sonidos normalesThermostat Termostato Solución DE Problemas Cuidado DE SU Acondicionador DE AireParece que el acondicionador de aire funciona excesivamente Se filtra agua del gabinete a su casaAyuda O Servicio Técnico Accesorios

ACE184XR0 specifications

The Whirlpool ACE184XR0 stands out in the competitive market of air conditioners, bringing together efficiency, innovation, and user-friendly design. This model is specifically engineered to provide optimal cooling performance while being energy-efficient, making it a smart choice for consumers who are conscious about energy consumption and environmental impact.

One of the key features of the Whirlpool ACE184XR0 is its powerful cooling capacity of 1.5 tons, making it suitable for medium to large-sized rooms. The air conditioner is equipped with advanced rotary compressors that enhance its cooling efficiency, ensuring that your space remains comfortably cool even during the hottest months of the year.

Efficiency is a crucial aspect of the ACE184XR0, as it boasts an impressive energy efficiency ratio (EER), which means it uses less energy to provide effective cooling. This not only reduces electricity bills but also minimizes the carbon footprint, aligning with modern sustainability goals.

The design of the ACE184XR0 is user-centric, featuring an easy-to-read LED display and remote control for convenient operation from any corner of the room. The integrated sleep mode ensures that the temperature gradually adjusts during the night, promoting cost savings and undisturbed sleep.

In terms of technology, the Whirlpool ACE184XR0 incorporates a comprehensive air purification system. This system utilizes a multi-stage filtration process to trap dust, allergens, and other contaminants, ensuring that the air circulating in your room is clean and healthy.

Additional features include various modes of operation such as cooling, dry, and fan modes, which provide flexibility depending on the seasons and specific user needs. The model also has a turbo mode for instant cooling, making it perfect for hot summer days when immediate relief is desired.

The Whirlpool ACE184XR0 is designed for quiet operation, a crucial feature for bedrooms and study areas. Enhanced sound insulation helps in reducing noise levels, allowing you to enjoy a peaceful atmosphere.

Overall, the Whirlpool ACE184XR0 is an excellent blend of performance, efficiency, and user-friendly features, making it a reliable choice for anyone looking to enhance their indoor air comfort while being mindful of energy use. Its advanced technologies, coupled with thoughtful design, ensure that it meets the diverse needs of modern consumers.
Top Page Image Contents