Whirlpool ACM122, ACM102 warranty Cleaning the air filter

Page 8

8.Replace filter and hold it in place with elastic band.

9.Replace the front panel. Locate bottom of panel on the spring clips. Press down on top edge of front panel and push it toward the air conditioner to secure the upper tabs.

10.Plug in the power cord.

Cleaning the air filter

The filter is cleanable. A clean filter helps remove dust, lint, and other particles from the air. Check every 2 weeks to see if filter needs cleaning.

1.Unplug power cord.

2.Remove front panel from cabinet. (See “Cleaningthe front panel” on page 7.)

3.Remove the elastic band holding the air filter in place. Remove the air filter.

4.Clean filter by using a vacuum cleaner or, if very dirty, wash filter with warm water and a mild detergent. Air dry thoroughly before replacing. Do not use a hot air dryer on filter.

5.Replace filter, elastic band, and front panel.

6.Plug in power cord.

8

Image 8
Contents Starting your air Performing annualThank you for buying a WHIRLPOOL@ appliance Please record your model’s informationHelp us help you Air Conditioner SafetyYour safety is important to us Parts and Features Operating Your Air Conditioner Starting your air conditionerChanging air direction Cleaning the front panel Caring for Your Air ConditionerCleaning the air filter Performing annual maintenance Keep the air filter clean Saving energyTroubleshooting Normal operating soundsRequesting Assistance or Service If you need serviceIf you need FSP Replacement parts If you are not satisfied with how the problem was solvedIndex System. These parts are Defects in materials or workmanshipFrom Date of Purchase