Whirlpool 3PACH21DD0 important safety instructions Using the Sleep Hours Cycle

Using the SLEEP HOURS Cycle

The SLEEP HOURS Cycle allows your air conditioner to optimize your comfort while you’re sleeping. The cycle allows the temperature of the room air to rise gradually until it reaches approximately 2°C above the set point temperature.

NOTE: The SLEEP Cycle can be set for cooling only.

Example shown for an O-hour SLEEP HOURS Cycle with unit running in the AUTO COOL Cycle.

E

Approximately2’C

temperature

1	I	I	I
2	4	6	0

TIME

To activate the SLEEP HOURS Cycle:

l Press the SLEEP HOURS Button until the number for the desired time period is lit. The numbers above the SLEEP HOURS Button indicate the number of hours set for the cycle:

8 hours + 5 hours --) 3 hours --) OFF

IMPORTANT: If, at any time during the SLEEP HOURS Cycle, you are too cold or too warm, simply press the WARMER or COOLER Button. The unit “learns” to adjust to your preferences automatically. There- fore, the next time you activate the SLEEP HOURS Cycle, the air conditioner remem- bers your previous adjustment and modifies the temperature so you will not be too cold or too warm again.

After the SLEEP HOURS Cycle is complete, the unit initially cools the room (back to the set point temperature) then reverts back to the previously set cycle (AUTO COOL, OFF, etc.).

3 5 a

SLEEP

0HOURS

AWARMER

vCOOLER

10