INSTALLATION INSTRUCTIONS
for Your Air Conditioner
Installation Instructions
for installing the unit in a
1l Unpack accessory parts (see Figure 3) be- fore installing your air conditioner.
Figure 3
PLASTIC
DRAIN
SPOUT
USED ON | $ | 0 | |
MODELS |
| ||
WITH DRAIN |
| ||
CUP AND | WEATHER | ||
HOLE IN | SEAL | ||
SEAL USED | STRIP | ||
REAR | ON 18 3/4”- | (Ya” x X” | |
CABINET | HIGH | ( Some | |
RAIL | |||
CABINETS | |||
Models) | |||
| |||
| ONLY | ||
|
|
CAUTION:
l Be sure air conditioner does not fall during installation.
l Handle the air conditioner with care. Watch out for the sharp metal fins on the front and rear coils.
l Do not use the water condensate for
drinking purposes. It is not sanitary.
2l Pick the right wall. First, decide what room(s) you want to cool. Then choose a wall that
will allow the
ELECTRICAL REQUIREMENTS for re- ceptacle and wiring needed.) Do not use an extension cord. (CAUTION: DO NOT LOCATE
AIR CONDITIONER WHERE PLASTIC CABINET FRONT WILL BE EXPOSED TO A HEAT SOURCE THAT RAISES THE
SURFACE TEMPERATURE IN EXCESS OF 120” F.)
_
7