INSTALLATION
This control is designed for flush mounting and to be located directly in the air stream
Follow the original equipment manufacturers' recommen- dations for proper location.
Wiring
All wiring must conform to local and national electrical codes and ordinances.
Follow the original equipment manufacturer's recommendations for proper wiring.
SETTING THE DIAL
Adjust temperature setting by inserting a screwdriver into open slot and turning pointer to desired temperature on dial.
The dial setting on the fan control is the temperature at which the contacts close. The dial setting on the limit control is the temperature at which the contacts open.
Adjustment Slot | Adjustment Slot | ||
160 | 70 | 110 | 200 |
150 | 80 | 120 | 190 |
140 | 90 | 130 | 180 |
130 | 100 | 140F | 170 |
120 | 110F | 150 | 160 |
FAN ON TEMP. | |||