Bosch Appliances D1260B owner manual Silencing Fire Alarms

Page 11

D1260/D1260B Owner's Manual Part I: Security system basics - Fire Alarms

Fire Alarms

Fire alarms are the highest priority events. When a fire point activates, your keypad emits a pulsating high- pitched fire tone. Evacuate all occupants and investigate for smoke or fire. Ensure that all occupants know the difference between the burglary tone and the fire tone. The tone sounds for the time set by your security company.

Silencing Fire Alarms

Entering a personal passcode with the proper authority level silences a fire alarm and disarms the system if it was armed.

The system will now display *Alarm Silenced* on the second line and Clear Display> appears on the fourth.

Then the number of points in alarm (# FIRE ALARMS) and then the area text appears (AREA 1 NAME TEXT) followed by the custom text of all the points in alarm (SMOKE DETECTOR), in the order of occurrence.

If there is more than one point causing an alarm, the display will show each point for three seconds before showing the next one.

When the last alarm is shown, the next display is the idle text. The cycle is repeated until COMMAND 4 is pressed.

Your system may be programmed so that you cannot silence some fire alarms until the fire event clears. Entering COMMAND 4 clears the scrolling point text from the display.

The *Alarm Silenced* message will continue to alternate with idle text as a reminder that it is still possible to view the text of the points in alarm by using the View Memory function. See VIEW MEMORY ? (Command 40) for more information.

To clear the event memory and remove the *Alarm Silenced* message from the display, press the Clear Display> soft key.

The display will show the instructions for clearing the message. Enter a valid passcode and press the Clear> soft key.

If a fire trouble still exists after acknowledging the alarm, the display shows Fire Trouble.

3seconds

3seconds

3seconds

3 seconds

To remove this display, the fire point(s) must be returned to normal. If you wish to review cleared events, use COMMAND 40.

Bosch Security Systems 9/04 50410D

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents D1260/D1260B Contents Bosch Security Systems 9/04 50410D Remote Program ? Command + 4 +Tables FiguresYour Keypad IntroductionD1260/D1260B Digital Keypad D1260/D1260B Keypad keys Using the keypadCommand center keys Your Custom Display PointsTo automatically scroll faulted or bypassed points View Faulted or Bypassed PointsPriority of Events To manually scroll faulted or bypassed pointsKeypad Quiets for Keystrokes Silencing Fire Alarms Fire AlarmsSilencing Burglary Alarms Burglary AlarmsSilencing Fire Trouble and Fire Supervisory conditions Fire Trouble and Fire Supervisory EventsNon-Fire Trouble and Supervisory Events Special System Trouble DisplaySilencing an Alarm Entering a Passcode Commands have been made available to youFor more information Keypad Commands To Turn Your Security System On Arm Turning On the System ArmingTurning Off the System Disarming Turning On the System Arming With a Duress PasscodeDisplay shows Area 1 Warehouse Not Ready to Arm Turning On the System Arming With Doors or Windows OpenBosch Security Systems 9/04 50410D Description Master ARM ? Command +Master Arming all Areas Master ARM Inst ? Command + 1 + Using Perimeter Inst Perimetr Inst Command +Turn On the Perimeter With No Delays Description Using Perimeter Delay Perimetr Delay ? Command +Turn On the Perimeter With Delays Description View Event Memory Description View Memory ? Command + 4 +Using Command Using View MemoryWalk Test Description Walk Test ? Command + 4 +Using Walk Test Bosch Security Systems 9/04 50410D Using Reset Sensors Reset Sensors ? Command + 4 +Reset Sensors Description Exiting Watch Mode Watch Mode ? Command +Watch Mode Description Partially Turn On the Perimeter Description Perimetr Part ? Command +Using Perimetr Part Special Alerts Command + 7 and Command + System Command Terms Used in This Section Advanced CommandsUsing Bypass a Point Bypass a POINT? Command +Bosch Security Systems 9/04 50410D Using Unbypass a Point Unbypass a POINT? Command + 0 +Using Send Report Send Report ? Command + 4+1 or 4+2Bosch Security Systems 9/04 50410D For systems without a phone number Remote Program ? Command + 4 +For systems with a phone number or network connection Change TIME/DATE Command + 4 + Using Door Control Door Control Command + 4 +Secure Door Cycle DoorDoor Status Unlock DoorAccess Level Show Continuous Time/Date Change Display Command + 4 +Brighten/Dim Display Extend Closing Command + 5 + ? prompt, press its adjacent soft key If you prefer, you may use the CommandCommand Menu When you reach the Extend ClosingUsing Chg Skeds CHG Skeds ? Command + 5 +Only on holiday Sked Table DEL User ? Command + 5 + CHG Passcodes ? Command + 5 + CHG Relays ? Command + 5 +Using Chg Passcodes ADD/CHANGE User Command + 5 + User 123 is used here as an example Add/Change PasscodeBosch Security Systems 9/04 50410D Display changes to Is this user authorized in Area 1? Add/Change LevelAdding/Changing a User’s Name Add/Change Card Add/Change Sub-User ID Default Text ? Command + 5 + Using Fire Test Fire Test ? Command + 5 +Points remain to be tested. before continuing the Fire Test Display REV ? Command + 5 +Service Menu ? 9 + 9 + Enter Using View Log Using Display Rev Using Print LogUsing Setup Using Default TextBosch Security Systems 9/04 50410D View Area Status Working with Multiple Areas from a Single Command CenterScreen Area Definitions View Point StatusMove to Area ? Command + 5 + Turning on Multiple Areas with a Passcode Turning On the SystemTurning on Selected Areas Turning on All or Selected Areas Turn On the Entire System Without DelaysFaulted Points in Other Areas Turning Off Multiple Areas with Disarm All Turning Off the SystemTurning Off Multiple Areas with a Passcode Turning Off Selected Areas Bosch Security Systems 9/04 50410D User Interface Supplementary Information for Adding PasscodesUser Authority Levels Passcode WorksheetAuthority Levels Print Log ? User Command 7 ? User Passcode Worksheet User 000 to User Token Worksheet User 000 to 038 D9412G/D7412G Only User Passcode Worksheet User 039 to User Token Worksheet User 039 to 075 D9412G/D7412G Only User Area Authority ### Passcode Group User Name Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 115 Site Card Data User Token Worksheet User 115 to 150 101-249 = D9412G only151 User Token Worksheet User 151 to 189 101-249 = D9412G only User Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 227 User Token Worksheet User 227 to 249 101-249 = D9412G only User Passcode Worksheet Blank User Token Worksheet Blank Security System LimitationsSmoke Detector Locations Plan View Fire Safety and EvacuationStandard Displays System Trouble Displays Service Point Bus 1 or Service Phone Line #1 or #2Service Printer Service D9210Security System Glossary Your Alarm Company Maintenance and ServiceHow to Clean the Command Center Bosch Security Systems 50410D
Related manuals
Manual 4 pages 9.7 Kb

D1260B, D1260 specifications

Bosch Appliances is known for its commitment to quality and innovation, and the Bosch D1260 and D1260B models exemplify these ideals in kitchen technology. These dishwashers are designed for efficiency, reliability, and performance, making them a great addition to any modern home.

One of the standout features of the Bosch D1260 and D1260B is their exceptional cleaning capabilities. Equipped with a powerful wash system, these dishwashers ensure that even the toughest stains and baked-on food come off with ease. The PrecisionWash technology utilizes intelligent sensors to continually scan and check the progress of dishes throughout the cycle, ensuring that every item is thoroughly cleaned.

In terms of design, both models showcase a sleek, stainless-steel finish that integrates seamlessly into any kitchen decor. The Quietest operation is another notable characteristic; with a noise level of just 48 dBA, these dishwashers are among the quietest available on the market. This feature is particularly beneficial for open-concept living spaces, where noise can disrupt the household environment.

The Bosch D1260 and D1260B also come with a flexible loading system that maximizes space and accommodates various types of dishware. The upper rack is adjustable, allowing users to create extra space for tall items. Additionally, the Bottom rack includes a fold-down tines feature, offering even more versatility in accommodating large cookware or odd-shaped items.

Energy efficiency is a key aspect of the Bosch brand. Both models are ENERGY STAR® certified, ensuring low water and energy consumption, which translates to cost savings over time. This not only helps the environment but also appeals to eco-conscious consumers looking to reduce their carbon footprint.

With a variety of washing cycles and options, including Heavy, Auto, and Quick rinse settings, users have the flexibility to choose the wash type that best suits their needs. Moreover, the models offer a Sanitize option that eliminates 99.9% of bacteria, providing an extra level of cleanliness for dishes.

In conclusion, the Bosch D1260 and D1260B dishwashers bring unmatched efficiency, innovative technologies, and elegant design to the kitchen space. With their quiet operation, flexible loading options, and outstanding performance, they set a new standard for modern dishwashing appliances. Whether for daily usage or entertaining guests, these models deliver exceptional cleaning results while enhancing the overall kitchen experience.
Top Page Image Contents