Bosch Appliances VG4-100 user manual Camera ID Submenu Function Selections Description

AutoDome Modular Camera SystemAdvanced Setup en 13

CAMERA ID Submenu
Function	Selection(s)	Description
CAMERA ID	Selects submenu	To enter up to a 17-character camera name:
		1.	Press the Menu Select key to enter the
			Camera ID string.
		2.	Enter up to a 17-character string name for
			the camera.
		3.	Use the Up and Down keys to select a charac-
			ter.
		4.	Use the Left and Right keys to change
			position in the string.
		5.	Press the Menu Select key to save and to
			exit the character string.
		6. Exit the Camera ID menu.
ID POS	OFF, TOP, BOT	Use left or right keys to select:
		OFF: Camera ID not displayed.
		TOP: Camera ID displayed at upper left corner of
		display.
		BOT: Camera ID displayed at lower left corner of
		display.
		(The camera ID is not displayed when the OSD
		menu is open.)
EXIT		Returns to the INSTALL menu.
SYNC Submenu
Function	Selection(s)	Description
SYNC	INTERNAL, LINE LOCK	INTERNAL: Synchronizes the camera to an inter-
		nal crystal. (default)
		LINE LOCK: Synchronizes the camera to AC
		power and eliminates picture roll in multi-camera
		systems.
VPHASE	(0º to 358º)	Adjusts the vertical phase offset in LINE LOCK
		mode.
		(Only active if a valid power supply frequency is
		detected.)
Exit		Returns to the INSTALL menu.
DEFAULTS Submenu
Function	Selection(s)	Description
RESTORE ALL?	NO, YES	Use the left or right keys to select:
		NO: To not change settings.
		YES: To restore all defaults. You receive a confir-
		mation message.
Exit		Returns to the INSTALL menu.

Bosch Security Systems, Inc. VG4-100 Series User’s Manual F01U028033 1.0 2006.08