Kicker Master Your Sound with KX100.2 Amplifier Installation Guide

Page 6

Installation

System Diagrams

The following diagrams show the most common configurations for your Kicker KX series amplifier.

TWO CHANNEL OPERATION (STEREO)

These KX amplifiers are capable of operating into a minimum impedance of 2 ohms per channel in stereo operation. Modern high performance speakers have a lower DC Resistance than what used to be available. The Kicker Coaxial and Component Speakers are rated at four ohms (some DC Resistances may be as low as 3 ohms) and work with any amplifier designed to oper- ate at a four ohm load. If you want to use two Kicker Coaxial or Component Speakers on a single channel of your amplifier wire the speakers in series. This will improve the sound quality, lower the total harmonic distortion and lessen the thermal load at the amplifier. This may prevent an amplifier from shutting down, due to over-current protection circuitry.

BRIDGED OPERATION (MONO)

KX.2 series amplifiers are capable of operating into a minimum impedance of 4 ohms when in bridged operation.

+

SIGNAL IN

MONO

SPEAKER

GROUND

REMOTE

TURN-ON

18"

or less

+12V FUSE

BATTERY

LEFT SPEAKER(S)

+

SIGNAL IN

STEREO AND MONO SIMULTANEOUSLY (SAMS) KX.2 series amplifiers are capable of operating into a

minimum impedance of 4 ohms mono and 2 ohm stereo simultaneously with the use of passive crossovers.

+

GROUND

RIGHT SPEAKER(S)

REMOTE

TURN-ON

18"

or less

+12V FUSE

BATTERY

One pair of 4 Ohm Speakers or two pairs of 4 Ohm Speakers wired in series is recommended.

2 Ohm minimum impedance

 

 

 

LEFT SPEAKER(S)

 

LOW

 

 

PASS

 

+

 

 

CROSS-

 

 

 

OVER

 

 

HIGH PASS

+

+

CROSSOVER

 

 

 

 

 

MONO

HIGH PASS

 

CROSSOVER

SPEAKER

RIGHT SPEAKER(S)

One pair of 4 Ohm Speakers or two pairs of 4 Ohm Speakers wired in series is recommended.

2 Ohm minimum impedance

SIGNAL IN

GROUND

REMOTE

TURN-ON

18"

or less

+12V FUSE

BATTERY

6

KX Amplifier

Image 6
Contents Page KX100.2 Features Mounting RemoveWiring KX100.2System Diagrams TWO Channel Operation StereoNavigation Crossover ControlKickBass Bass Boost Control Green LED on, no output Trouble ShootingGreen LED off, no output With a Volt Ohm Meter VOM check Red LED on, no outputAlternator noise--whining sound with engine’s RPM Poor stereo image or reduced bass responseSpecifications of KX100.2 PerformanceWhat is not COVERED?

KX100.2 specifications

The Kicker KX100.2 is a versatile and powerful car amplifier designed to enhance the audio experience in your vehicle. With a compact size and an impressive power output, this amplifier is ideal for both casual listeners and hardcore audiophiles who want to take their in-car sound system to the next level.

One of the standout features of the KX100.2 is its robust power output. With a maximum power rating of 100 watts RMS at 2 ohms, the amplifier is capable of delivering high-quality sound and dynamic performance. This level of power ensures that your speakers can reach their full potential, providing clear, loud, and rich audio regardless of the genre of music you enjoy.

The KX100.2 employs advanced Class D technology, which offers superior efficiency compared to Class A/B amplifiers. This not only means that the amplifier produces less heat, but it also allows for a more compact design. The small footprint makes it easier to install in various locations in your vehicle, whether under a seat or in the trunk.

Another notable characteristic of the KX100.2 is its signal-to-noise ratio, which is impressive at 95 dB. This high ratio ensures minimal interference, resulting in cleaner sound quality and better overall clarity. The amplifier also features a low-pass crossover, which allows users to control the frequencies being sent to their subwoofers, fine-tuning the sound to match their personal preferences.

The KX100.2 is equipped with Kicker's proprietary Auto Turn-On technology. This feature automatically detects when an audio signal is present, allowing the amplifier to power up and down without manual intervention. This contributes to greater convenience and ease of use, ensuring that your system is ready to deliver exceptional sound at all times.

Additionally, the amplifier comes with a variety of adjustable settings, including bass boost and gain control. These functionalities enable users to customize the sound output to suit their specific audio needs, whether they are looking for a more pronounced bass response or a balanced soundstage.

In conclusion, the Kicker KX100.2 is an excellent choice for anyone looking to improve their car audio system. With its powerful output, efficient design, and user-friendly features, it stands out as a reliable and high-performing amplifier. Its advanced technologies and adjustable settings make it a versatile option that caters to a wide range of listening preferences. Whether you’re an audio enthusiast or just want better sound in your car, the KX100.2 is sure to impress.