Bosch Appliances Safety Earthing of the MIC 500 Series Camera, Video Video BNC CN1 Connection

MIC Series 500 Camera MIC 500 Series Camera Quick Start Guide en 5

The MIC 500 Series camera has a security attachment point for attaching to a safety chain (not supplied), which in turn should be attached to a secure part of the structure during installation or removal.

WARNING!

Use caution when installing the MIC 500 Series camera. Follow common sense precautions such as fitting a safety chain.

1.2	Safety Earthing of the MIC 500 Series Camera
		The electronics and housing of the MIC 500 Series camera are electrically isolated; however,
		the housing should be safety earthed regardless. This safety earth should be a bonding
		connection, such as one of the securing bolts, to the outside case of the camera. The camera
		should be earthed at one point only to prevent earth loops and thus hum bars appearing on
		the camera picture in the control room.
		Shielded Composite Cable Connections
		Note: all connections must be made.
		Composite Cable Wire Color		Function	MIC PSU Terminal Block		PCB Marking
		Red		AC supply		HD3-1	Power
		Green		AC supply return		HD3-2	Power
		White		RX +		Hd3-3	RxB
		Yellow		Rx -		HD3-4	RxA
		Drain Wire		Ground		HD3-5	GND
		Blue		Tx -		HD3-6	TxA
		Violet		Tx +		HD3-7	TxB
		Coax Core		Video		HD3-8	Video
		Coax Screen		Video return		HD3-9	Vid 0V
		Black (optional)		Tamper switch		HD3-10	Tamp Sw
		Orange (optional)		Wash drive		HD3-11	Wash
		Brown		Heater+		HD6-1
		Gray		Heater-1		HD6-2
		1. Please refer to the MIC Series Power Supply Manual for details on connecting MIC 500 Series cameras with
			heaters and other auxiliary equipment.
		Mains Power and Video Connections
		Mains
		Live	HD1-1
		Neutral	HD1-2
		Earth Connection	Already made
		Video
		Video BNC CN1	Connection
		Core	Video to Control Room
		Screen	Video GND to Control Room

Bosch Security Systems, Inc. User’s Manual F.01U.173.601 2.0 2010.11