Custom Code Programming Example | Audiovox APS-996A specs

NOTE: If 15 seconds of inactivity expire or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code.

Custom Code Programming Example:

To Change the code from the factory pre-assigned code of 11 to “52” you would do the following:

1.Disarm the system by use of the transmitter or by use of the emergency override sequence.

2.Turn the ignition switch to the on position.

3.Within 10 seconds, press and release the valet/override switch, 3 times.

4.Within 10 seconds turn the ignition switch off, on, off, on, off, on. (The siren or horn will beep and the lights will flash one time.)

5.Within 10 seconds, begin to press and release the pushbutton switch to set the tenths digit.

(As per the example, press and release 5 times to set the tenths digit to 5)

6.Within 10 seconds of the last press of the pushbutton, turn the ignition switch off then on.

7.Within 10 seconds, begin to press and release the pushbutton switch to set the units digit.

(As per the example, press and release 2 times to set the units digit to 2).

8.Turn the ignition switch to the off position. Immediately observe the LED flash pattern.

You will note the LED flashing five times, pause, and then flash two times, pause. This pattern will be repeated three times indicating the new code (52) has been accepted and stored in memory.

NOTE: If after step 7, the LED flashes a code other than what was just entered, this indicates that the code has not been changed. You will have to repeat steps 1 through 7 above being certain to note the following:

Acceptable digits 10ths or units are 1 through 9. The unit will not recognize a 0 (Zero), or no digit entered in any place, units or tenths.

NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code.

MANUALLY OVERRIDING YOUR SYSTEM:

USING THE CUSTOM CODE OVERRIDE

Assuming the override code programmed has not been changed, and the default override code of 11 is in the system's memory.

1.Enter the vehicle and turn the ignition switch to the on position. NOTE: The siren will sound.

2.Within 5 seconds, press and release the pushbutton switch 1 time.

3.Within 5 seconds, turn the ignition switch off then on.

4.Within 5 seconds, press and release the pushbutton switch 1 time.

5.Turn the ignition switch off then on and start the vehicle.

NOTE: If you have changed the programmed override code then substitute your new code tenths for step 2 above, and units for step 5 above.

Page 8

128-6772

8 of 20

APS-996A specifications

The Audiovox APS-996A is a highly acclaimed vehicle security and remote start system that combines advanced technology with user-friendly features to enhance vehicle safety and convenience. Ideal for those seeking peace of mind and easy access to their vehicles, the APS-996A stands out in the competitive market of automotive security systems.

One of the signature features of the APS-996A is its two-way communication capability. The system is equipped with a robust transmitter and a sleek LCD screen that provides real-time feedback on the status of the vehicle. This allows the user to know whether their vehicle is locked or unlocked, if an alarm has been triggered, or if the engine has successfully started from a distance of up to one mile. Such feedback is crucial for ensuring vehicle security in busy or crowded spaces.

The APS-996A employs advanced security technologies, including a shock sensor that detects impacts or vibrations, thereby triggering the alarm. This is complemented by a hood and trunk tamper sensor, enhancing surveillance and minimizing the chances of unauthorized access. Additionally, the system features a built-in starter kill relay, which prevents an unauthorized person from starting the vehicle's engine, thereby providing an additional layer of safety.

Remote start functionality is another impressive feature of the Audiovox APS-996A. This functionality allows users to start their vehicle from a distance, which can be particularly advantageous in extreme weather conditions. Users can set their vehicle to preheat or cool, ensuring a comfortable environment before they even step inside.

Installation of the APS-996A is straightforward, making it accessible for professional installers and DIY enthusiasts alike. The system is designed to be compatible with most vehicles, providing a versatile choice for a wide range of car models.

Furthermore, the Audiovox APS-996A includes features such as car finder capability that helps locate the vehicle in crowded parking lots and a built-in battery backup system, ensuring functionality even if the vehicle's power supply is compromised. With these features, it is evident that the Audiovox APS-996A is a comprehensive solution catering to contemporary vehicle security and convenience needs.

In summary, the Audiovox APS-996A offers a combination of effective security measures and modern remote start technology, making it an excellent investment for vehicle owners looking to protect their investments and enhance their driving experience. Whether it’s the impressive range, two-way communication, or protective features, the APS-996A effectively meets and exceeds the demands of today's drivers.