Valet Switch

•If the LED is flashing two times...pause...two times...pause...etc., then an intrusion attempt was made to a hood or trunk pin switch that was added to the system, or to a light activated entry point if the alarm was installed using the voltage sensing feature.

ŽIf the LED is flashing three times...pause...three times...pause...etc., then an intrusion attempt was made through one of the vehicle’s doors.

These intrusion warning indicators are stored in the system’s memory and will only be erased when the ignition key is turned on.

The valet switch allows you to temporarily bypass all alarm functions, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions are bypassed, however the remote panic feature and remote door locks will remain operational. To use the valet mode, the system must first be disarmed either by using your keychain transmitter, or by operating the manual override sequence.

1.From the disarmed condition, turn the ignition key to the on position.

2.Press and hold the valet pushbutton switch until the dash mounted LED, turns on. The LED will remain on as long as the system is in valet mode.

3.To return to normal operation, press and release the push button switch any time the ignition is on.

NOTE: Always remember to return the system to the NON VALET mode, after servicing, to ensure that the vehicle remains protected at all times.

MANUALLY OVERRIDING YOUR SYSTEM:

USING THE VALET SWITCH MANUAL OVERRIDE

Your Security System can be disarmed without the use of the keychain transmitter. This is necessary, since you will need the ability to operate your vehicle if the transmitter is lost or its battery fails. If your system has been selected for Valet Switch manual override as indicated on the last page of this manual, to by-pass the alarm system.

1.Open the vehicle door. The alarm will sound.

2.Turn the ignition key to the on position.

3.Within 5 seconds, press and release the valet push button switch.

The alarm system will stop sounding and enter the disarmed mode. You can now start and operate the vehicle normally.

Typically this override mode is used only if the transmitter has become inoperative. You may elect to enter the VALET mode until repair or replacement of the transmitter, after which, returning the system to the full operation mode is necessary. To do so, see item 3 under the heading VALET SWITCH.

Page 6

128-6802

6 OF 12

APS-511C specifications

The Audiovox APS-511C is a top-tier vehicle security system designed to provide comprehensive protection against theft and unauthorized access. Known for its reliability and advanced features, this system is a popular choice among car enthusiasts and everyday users alike.

One of the standout features of the APS-511C is its two-way communication capability. This allows the driver to receive real-time alerts and status updates directly on their remote control. Whether it’s a triggered alarm or a disturbance detected by the system, users can be instantly informed, enhancing their peace of mind.

The unit is equipped with a state-of-the-art shock sensor. This technology can detect vibrations and impacts to the vehicle, triggering an alarm if any suspicious activity is sensed. Additionally, the system features a backup battery, ensuring that the security measures remain active even if the vehicle’s power supply is compromised.

Another key characteristic of the Audiovox APS-511C is its comprehensive alarm system. The device generates an audible alarm and activates LED indicators to deter potential thieves. This multi-layer approach to security is crucial, especially in high-theft areas.

The APS-511C also incorporates a remote start function, allowing users to start their vehicle from a distance. This feature is particularly beneficial for those living in colder climates, enabling the engine to be warmed up before entering the car. Moreover, it adds convenience for users who prefer to cool down their cars in the summer heat.

Integration with a variety of vehicles is simple and straightforward, making it a versatile option for users with different makes and models. The installation process is user-friendly, though professional installation is recommended to ensure optimal operation and coverage.

Additional features include a panic button for emergencies, various programmable options, and the capability to customize sensitivity levels based on personal preferences.

In summary, the Audiovox APS-511C stands out in the competitive vehicle security market due to its user-friendly design, advanced technologies, and multitude of features. Its two-way communication, shock sensors, and remote start function are particularly appealing, making it a reliable option for those seeking to enhance their vehicle’s security. Whether for daily commuting or long-distance travel, the APS-511C provides an effective and robust solution to vehicle protection.