4 HANDLING PRECAUTIONS
The following information deals with measures to ensure safe operation of the pump system. Please read the precautions carefully.
To operate this pump, a
4.1General Handling Precautions
•Do not remodel the pump:
Do not alter or modify the pump. Iwaki America takes no responsibility for accidents or damage that may result from improper modification of the product. Consult Iwaki America to discuss any alteration to the product.
•Do not touch:
When the pump is handling liquids higher than 50°C, avoid direct contact with the pump or piping system. Use appropriate hand protection if handling of the pump or piping is necessary.
•Wear protection:
Always wear protective gear (goggles, face shield, acid resistant gloves, etc.) when maintaining, removing or servicing the pump. In addition, flush the pump completely with DI water prior to any service or maintenance.
•Qualified operators:
Operation, service, maintenance and removal of the pump should be performed by trained personnel only.
•Disposal of used pump:
Disposal of used or damaged pumps must be in accordance with all federal and local regulations.
•Return to Iwaki America:
Contact Iwaki America prior to returning any product to discuss proper decontamination and return procedures. Iwaki America will issue a return authorization number to track the return. Note: Avoid cutting pump suction and discharge tubing. Leave existing fittings or adequate length of tubing to facilitate testing or evaluation.
7