Toro 212 manual Service and Specifications Replacing The Fuse, Adding a Station Module

Page 33

Service and Specifications

Replacing The Fuse

A 0.75 Amp fuse protects the controller from damage due to power surges and excessive current draw through the Station Modules. Before replacing the fuse, check for the probable cause, such as a shorted or improperly connect- ed control valve wire, then replace the fuse as follows:

1. Unplug the transformer from the wall receptacle.

WARNING

REMOVE TRANSFORMER FROM POWER SOURCE PRIOR TO SERVICING THE FUSE. FAILURE TO COMPLY MAY RESULT IN INJURY AND/OR DAMAGE TO CONTROLLER.

2.Remove the lower front cover from the controller housing by sliding it downward.

3.Carefully remove the blown fuse from the retaining clip.

4.Remove the replacement fuse from the back side of lower cover and install it into fuse retaining clip.

CAUTION: For continued protection against risk of fire, replace only with the same type and rat- ing of fuse.

5.Install the lower front cover.

6.Plug the transformer into the wall receptacle.

Adding A Station Module

1.Turn the control dial to the OFF position.

2.Remove the lower front cover from the controller housing by sliding it downward.

12HR

24HR

1

2

3

4

7

8

3.Place the back of the station control module (model number MOD 212-02) squarely between the guides of the first open expansion slot (from left to right).

Pushing lightly on the bottom of the module, slide it upward until it locks into position.

4.To connect the valve wires, refer to “Connecting The Valves” on page 23.

5.Install the lower front cover.

6.To set the station run time, refer to “Setting Station Run Times” on page 21.

7.To test the operation of the new watering station(s), refer to “Manual Operations” on pages 27 and 28.

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents For Indoor Use Only Automatic Sprinkler System ControllerPage Table of Contents Controller Components GreenKeeper 212 Introduction and Set UpLCD Display GreenKeeper 212 ComponentsControl Buttons Control Dial PositionsController Components Control Dial Positions Fuse 0.75 Amp, 250V Fast Blow fuseCircuit On and Off Battery Sprinkler System Basics ValveHouse Watering Program Diagram Starts 500 AM Station Watering Program BasicsProgram Ends- 540 AM Watering Program Details Setting The Station Run Time Selecting Program Start TimesProgram start times are numbered 1 through 4. These Planning Your Watering Schedule Guidelines For WateringFilling Out The Watering Schedule Form Example Program a Program B Program C Programming Before Installation Installing The BatterySlide the lower housing About The GreenKeeper 212 Memory Selecting Optional FeaturesResetting The Controller Memory To Reset The Permanent Program FigureTo Clear The Memory Figure Programming The Controller Setting The Watering Day Schedule Setting a Calendar ScheduleTurn the control dial to the Watering Days position Setting An Interval Schedule Turning Off a Program Setting An Odd or Even ScheduleTurn the control dial to the Program Start Time position Setting Program Start TimesTurn the control dial to the Station Times position Setting Station Run TimesMounting The Controller InstallationValve Common Wire Valves Connecting The ValvesConnecting a Pump Start Relay Connecting The Transformer Either terminalValve connected Optional Connecting a Toro Rain SwitchUsing the Season Adjust Feature, Using the Rain Delay Feature,Automatic Operation Turning Off The GreenKeeper 212,Starting Programs and/or Stations Manually Manual OperationTo Resume Watering when paused Watering Control FeaturesTo Adjust The Station Run Time To Skip StationsTurning Off The GreenKeeper Using The Rain Delay FeatureUsing The Season Adjust Feature Service and Specifications Replacing The Fuse Adding a Station ModuleUnplug the transformer from the wall receptacle Troubleshooting Warranty SpecificationsElectromagnetic Compatibility
Related manuals
Manual 36 pages 28.45 Kb

212 specifications

The Toro 212 is a remarkable piece of equipment designed specifically for professionals in the landscaping and turf management industries. Known for its durability and efficiency, this powerful machine stands out in a crowded market due to its advanced features and innovative technologies.

One of the main features of the Toro 212 is its powerful engine. Equipped with a reliable, high-performance engine, the 212 ensures ample power for cutting through even the toughest grass and terrain. The engine is designed to be fuel-efficient, allowing operators to maximize productivity while minimizing downtime and fuel costs.

Another key characteristic of the Toro 212 is its cutting system. The mower features a robust cutting deck that provides exceptional cutting performance. With multiple cutting heights available, operators can easily adjust the height to meet specific turf requirements, ensuring a clean and professional finish every time. The deck is also engineered to minimize clumping and improve grass discharge, leading to healthier turf.

In terms of technology, the Toro 212 incorporates advanced engineering solutions that enhance its overall functionality. The machine is designed with user comfort in mind, featuring an ergonomic control system that allows for easy operation. The intuitive layout of controls ensures that operators can maneuver the mower with precision, improving overall efficiency and reducing operator fatigue during long hours of use.

Additionally, the Toro 212 includes a maintenance-friendly design. With easy access to critical components, routine maintenance tasks can be performed quickly, ensuring that the mower remains in peak operating condition. This was achieved through careful engineering, allowing for quick inspections and repairs without the need for specialized tools.

Moreover, the Toro 212 is built with high-quality materials that contribute to its longevity. The chassis is constructed from durable steel, providing the stability and strength needed to withstand the rigors of daily use. The mower is also designed to resist wear and tear due to environmental factors, ensuring that it retains its performance and appearance over time.

In conclusion, the Toro 212 is a highly efficient and reliable mower that integrates advanced technology and user-friendly features. Its powerful engine, exceptional cutting system, and maintenance-friendly design make it an excellent choice for landscaping professionals who demand performance and durability in their equipment. Whether for commercial use or large residential properties, the Toro 212 delivers outstanding results, contributing to the beauty and health of turf areas.
Top Page Image Contents