System Sensor DH200RPL manual Standby, Alarm, And Sensitivity Tests Standby And Trouble

Page 6

Figure 10. Wiring Diagram for DH200RPL Duct Detector with optional RA400Z:

5

7

RA400Z

 

 

 

DO NOT BREAK TAB ON RA400Z

5 = Alarm Signal

7 = Aux. Power (–)

Figure 11. System Wiring Diagram for DH200RPL Duct Smoke Detector with RTS451/RTS451KEY:

RTS 451/RTS451KEY

1

ALARM SIGNAL

3

NOT USED

56

ALARM SIGNALNOT USED

7

2

AUX. POWER (–)

CIRCUIT

REFERENCE

 

4

4

 

TEST +

 

 

3

5

TEST

SWITCH

TEST –

FOR RTS451, TERMINAL 3 IS NOT

USED. (RTS451 DOES NOT HAVE

A TERMINAL 6.) FOR RTS451KEY,

TERMINALS 3 AND 6 ARE NOT USED.

Figure 12. Wiring Diagram for DH200RPL with optional PA400:

[9.2] Standby, Alarm, And Sensitivity Tests

[9.2.1] Standby And Trouble

Standby — If the system control panel is programmed, look for the presence of the flashing LEDs through the transparent housing cover. The LED will flash with each communicat- ion.

Trouble — If the detector LEDs do not flash, then the de-tector lacks power (check wiring, panel pro-gramming, or power sup ply), the detector board is missing (replace), or the unit is defec-tive (return for repair). Additionally, if the cover is removed for more than 20 minutes, the LEDs of the detector will not flash.

Test — The trouble condition can be caused intentionally to veri- fy correct operation of the system. Remove the detector board to cause a trouble condition locally and at the sys- tem control panel.

[9.2.2] Alarm Tests

[9.2.2.1] M02-04-00 Magnet Test

1.Place the painted surface of the magnet onto the TEST locator on the bottom of the detector housing (Figure 13).

2.Verify system control panel alarm status and control panel execution of all intended auxiliary functions (i.e. fan shutdown, damper control, etc.)

3.The detector is self-restoring when the magnet is removed. Verify that the system control panel has reset; panel may have to be reset.

Figure 13. Testing detector alarm:

5 7

PA400

Figure 14. Insulator Card for DH200RPL Duct Smoke

Detector:

5 = Alarm Signal

7 = Aux. Power (–)

D200-39-00

6

I56-1977-004R

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Contents of the Duct Smoke Detector Housing Kit Exploded View Of Duct Smoke Detector ComponentsLimitations of Duct Detectors Installation SequenceSecure The Detector Housing To The Duct Verify Duct Air Flow Direction And VelocityInstallation of foam gaskets over sampling tube bushings Sampling tubes recommended for different duct widthsWiring Instructions Smoke Entry Tests Air Flow Air Flow Test using Aerosol SmokeFilter Replacement Smoke Entry TestStandby, Alarm, And Sensitivity Tests Standby And Trouble Alarm Tests 2.1 M02-04-00 Magnet TestModel DH200RPL Air Duct Smoke Detector Specifications Board Replacement Sensor Board ReplacementPower Board Replacement 2.2 RTS451/RTS451KEY Remote Station TestThree-Year Limited Warranty Current Requirements using no accessoriesAccessory Current Loads at 24 VDC Contact Ratings

DH200RPL specifications

The System Sensor DH200RPL is a cutting-edge smoke detection sensor designed to enhance fire safety in a variety of environments. With a commitment to innovation and reliability, this sensor is engineered to meet the demands of both commercial and residential applications.

One of the defining features of the DH200RPL is its dual detection technology, which utilizes both photoelectric and ionization sensing methods. This dual approach ensures that the sensor can effectively identify both smoldering and flaming fires, providing a comprehensive solution for smoke detection. The photoelectric component is particularly effective in detecting slow, smoldering fires, while the ionization part excels in identifying fast-flaming fires. This combination enhances the overall effectiveness of fire detection, offering peace of mind to users.

Additionally, the DH200RPL is equipped with advanced digital signal processing technology. This technology allows for improved sensitivity and a faster response time, ensuring that any potential smoke event is detected promptly. The sensor is also designed to minimize false alarms, addressing a common concern in smoke detection systems. By intelligently analyzing the environmental conditions, the DH200RPL can differentiate between actual smoke and non-threatening particles, reducing unnecessary alerts.

The sensor features a sleek, modern design that can seamlessly integrate into various settings without being obtrusive. It is compact and lightweight, making it easy to install in various locations. Furthermore, the DH200RPL is compatible with a wide range of existing fire alarm systems, providing flexibility for upgrades or new installations.

Another notable feature is its built-in connectivity options, allowing for integration with advanced fire alarm monitoring systems. This feature enhances the sensor’s functionality by enabling remote monitoring and alert notifications, ensuring that users are informed of any potential issues even when they are not on-site.

In conclusion, the System Sensor DH200RPL smoke detector stands out in the market due to its dual detection technology, advanced signal processing, and integration capabilities. Its efficient design and smart functionalities make it an ideal choice for ensuring safety in various environments, making it a trusted option for both homeowners and business operators alike. With the DH200RPL, users can rest assured that they are protected by one of the most reliable smoke detection technologies available today.
Top Page Image Contents