Viking 855 service manual Warranty, Section

Page 16

TECHNICAL SERVICE MANUAL

SERIES 855

Sizes AS, AK, AL, KE, KKE

SECTION

 

TSM 685.2

 

PAGE

 

16 of 16

ISSUE

 

C

 

 

 

WARRANTY

Viking warrants all products manufactured by it to be free from defects in workmanship or material for a period of one (1) year from date of startup, provided that in no event shall this warranty extend more than eighteen (18) months from the date of shipment from Viking. If, during said warranty period, any products sold by Viking prove to be defective in workmanship or material under normal use and service, and if such products are returned to Viking’s factory at Cedar Falls, Iowa, transportation charges prepaid, and if the products are found by Viking to be defective in workmanship or material, they will be replaced or repaired free of charge, FOB. Cedar Falls, Iowa.

Viking assumes no liability for consequential damages of any kind and the purchaser by acceptance of delivery assumes all liability for the consequences of the use or misuse of Viking products by the purchaser, his employees or others. Viking will assume no field expense for service or parts unless authorized by it in advance.

Equipment and accessories purchased by Viking from outside sources which are incorporated into any Viking product are warranted only to the extent of and by the original manufacturer’s warranty or guarantee, if any.

THIS IS VIKING’S SOLE WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, WHICH ARE HEREBY EXCLUDED, INCLUDING IN PARTICULAR ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No officer or employee of IDEX Corporation or Viking Pump, Inc. is authorized to alter this warranty.

VIKING PUMP, INC. A Unit of IDEX Corporation Cedar Falls, IA 50613 USA

© 5/2007 Viking Pump Inc. All rights reserved

Image 16
Contents Model Number Chart ContentsIntroduction Safety Information and Instructions SymbolSuction Discharge Special InformationRelief Valve Position Maintenance Suggested Repair ToolsExploded View Sizes AS, AK, AL, KE & KKE Mag-Drive Pumps Model number systemName of Part Coupling Torque and Size Options Drive Configuration MD2- B Series Coupling and Bearing Carrier ComponentsMD2- c Series Coupling and Bearing Carrier Components Pump DisassemblyRefer to Figures 4, 6, 7 & 8 for names of parts Disassembly of Coupling Pump, Inner magnet and canister assemblyInner Magnet and locknut assembly Motor or Bearing Carrier and BracketDisassembly / Assembly of Bearing Carrier MD2-B outer magnet, bolt on hub Bearing CarrierMD2-c outer magnet, bolt on hub and bearing Carrier On page 6 and then proceed as followsAssembly of Pump Installation of BushingsCasing Bushing positioning Pump Rotation 001MD2-B Couplings Assembly of CouplingMD2- C Couplings Adjusting END Clearance Procedure a Procedure B Pressure Relief Valve InstructionsDisassembly Relief Valve Valve AS, AK, AL, KE and KKE SizesTroubleshooting Warranty Section