SonicWALL TZ 180 manual Setting Up SonicWALL GAV Protection, Enabling SonicWALL GAV

TotalSecure Configuration Task List

Setting Up SonicWALL GAV Protection

The Security Services > Gateway Anti-Virus SonicWALL GAV on your SonicWALL security

page provides the settings for configuring appliance.

Enabling SonicWALL GAV

You must select Enable Gateway Anti-Virus check box in the Gateway Anti-Virus Global Settings section to enable SonicWALL GAV on your SonicWALL security appliance. If your SonicWALL security appliance is running SonicOS Standard 3.0, you must also specify the interfaces you want to apply SonicWALL GAV protection. If your SonicWALL security appliance is running SonicOS Enhanced 3.0, you must specify the Zones you want SonicWALL GAV protection on the Network > Zones page.

Applying SonicWALL GAV Protection on Interfaces

If your SonicWALL security appliance is running SonicOS Standard 3.0, you also need to specify the interface that you want enabled for SonicWALL GAV protection. Depending on the SonicWALL security appliance model you are using, you can choose the WAN, LAN, DMZ, OPT or WLAN port. After selecting the interface(s), click Apply.It is recommended you select the WAN and LAN interfaces.

If your SonicWALL security appliance is running SonicOS Enhanced 3.0, you apply SonicWALL GAV to Zones on the Network > Zones page.

Note: Refer to “Applying SonicWALL GAV Protection on Zones (SonicOS Enhanced 3.0)” on page 26 for instructions on applying SonicWALL GAV protection to zones.

SonicWALL TZ 180 TotalSecure 25