Speco Technologies SIPMPBVFH, SIPMPDVFH instruction manual

Page 25

 

Parameters

Description

 

 

IP address

Check this box to enable IP Address Filtering.

 

 

filter enable

 

 

 

 

 

 

 

The filter can be set in either “Allow” mode or “Block” mode.

 

 

 

1. “Allow” mode will refuse access to all IP addresses except the

 

Filter

 

ones listed below.

 

 

Method

2. “Block” mode will accept all incoming access except the IP

 

addresses listed below.

 

 

 

 

 

 

 

 

Make sure you include the Netmask in your consideration.

 

IP Address

The IP address you wish to allow or block. Please note that the

 

actual range is modified by the Netmask.

 

 

 

 

 

 

 

 

Using Netmask allows you to set filtering for a whole range of IP

 

 

 

address at once, without the need to enter all of them individually.

 

Netmask

If you are not sure about the function of netmask, then you should

 

use 255.255.255.255, and it will affect only a single IP address per

 

 

 

 

 

 

line of entry, or use 255.255.255.0 to use the same setting for all

 

 

 

IP addresses starting with the same three numbers. .

 

 

 

For each entry, you must check this box for it to be effective. For

 

 

 

an entry that you no longer need but does not wish to delete, you

 

Enable

can uncheck it, and the system will remember it for future use. If a

 

 

 

new entry that has never been used before does not have Enable

 

 

 

checked, then it will not be stored in memory.

 

 

 

 

Click this to use the current displayed info to do IP Address

 

Apply

 

filtering. If you setup correctly, it will change into a grayed out

 

 

 

“Success” in a few seconds.

 

 

Reset

 

Click this button to re-enter the parameters.

 

 

 

 

 

 

Click the

[Apply] button to confirm the settings or click the

[Reset] button to

re-enter the parameters.

2-21

Image 25
Contents Sipmpbvfh & Sipmpdvfh Table of Contents Appendix Page Features Dimensions Dimension and Connector DescriptionSipmpdvfh Connector Description Installation Setup your PC network Preparation before setupPage Page Page Step Click the OK button and the window dialog box closes Configuring the IP device Page Video Display Page Page SNTP/NTP Date & TimePage Network Section Host IP Address Filtering Page Https Port MappingIgmp ToS UPnPTM RTP Snmp SettingPage Speed & Duplex IP Settings Connection Type IPV6 DNS Ddns Video Video & AudioLive view of the camera Live view of the camera This value controls the level of light where camera Page Mode into Day This value controls the level of light where camera Camera switch to night mode at a darker illumination Level Adjust Column Adjust Square Page Page Select the available frame rate from the drop down menu Page Select the white balance mode. After you set Select exposure mode to auto or manual Page Page OSD User Account SystemSystem Info Factory Default Firmware Upload Profile Upload Logout Save & RebootSipmph Camera Series SpecificationCamera Spec Sipmpdvfh New Highway Amityville, NY

SIPMPDVFH, SIPMPBVFH specifications

Speco Technologies has established itself as a leading manufacturer of high-quality security products, and their SIPMPDVFH and SIPMPBVFH models are prime examples of their commitment to innovation and excellence in the field of surveillance. Both models are designed to meet the increased demand for sophisticated security solutions in various applications, such as residential, commercial, and industrial settings.

The SIPMPDVFH is a high-performance IP dome camera that boasts a 5MP sensor, providing superior image clarity and detail. It features advanced H.265 compression technology, which minimizes bandwidth usage while maintaining high video quality. This is particularly valuable for users with limited storage capacity or those who require real-time streaming. The camera's wide dynamic range (WDR) enhances image quality in challenging lighting conditions, ensuring that both bright and dark areas are captured effectively.

Equipped with a motorized varifocal lens, the SIPMPDVFH offers flexibility for a variety of surveillance needs. Users can easily adjust the focal length remotely, allowing for perfect framing of the desired area without needing to physically reposition the camera. Additionally, the camera supports PoE (Power over Ethernet), simplifying installation by allowing a single cable to provide both power and data connectivity.

On the other hand, the SIPMPBVFH is a powerful bullet camera that also utilizes a 5MP sensor and H.265 compression technology. Its rugged design makes it suitable for outdoor environments, boasting an IP67 weather rating that protects against dust and water intrusion. This feature is essential for ensuring reliable operation in various weather conditions, enabling continuous surveillance without interruptions.

Both cameras include built-in infrared (IR) technology, allowing for nocturnal surveillance up to 100 feet, ensuring visibility even in complete darkness. Their integration with audio capabilities enables two-way communication, enhancing user interaction and response during security incidents.

Furthermore, both models are compatible with Speco's advanced video management software, which allows for seamless integration into existing security systems. Features such as motion detection, scheduled recording, and event alerts provide users with a comprehensive monitoring solution.

In summary, the SIPMPDVFH and SIPMPBVFH from Speco Technologies represent cutting-edge surveillance technology. With their high-resolution imaging, robust build quality, and advanced features like remote configuration and video analytics, these cameras offer reliable solutions for today’s security challenges. Ideal for enhancing safety and security, they stand out in an increasingly competitive market.