4XEM IPCAMW40 manual Initial Access to the Network Camera, Check Network Settings

Page 10

configurations.

Initial Access to the Network Camera

Check Network Settings

The Network Camera can be connected either before or immediately after software installation onto the Local Area Network. The Administrator should complete the network settings on the configuration page, including the correct subnet mask and IP address of gateway and DNS. Ask your network administrator or Internet service provider for the detail information. By default the Network Camera requires the Administrator to run installation every time it reboots. If the network settings are to remain unchanged, disable the Install option. Refer to “Network settings” on the System Configuration page for details. If any setting is entered incorrectly and cannot proceed to setting up the Network Camera, restore the factory settings following the steps in the “Troubleshooting” chapter of the Appendix.

Add Password to prevent Unauthorized Access

The default Administrator’s password is blank and the Network Camera initially will not ask for any password. The Administrator should immediately implement a new password as a matter of prudent security practice. Once the Administrator’s password is saved, the Network Camera will ask for the user’s name and password before each access. The Administrator can set up a maximum of twenty (20) user accounts. Each user can access the Network Camera except to perform system configuration. Some critical functions are exclusive for the Administrator, such as system configuration, user administration, and software upgrades. The user name for the Administrator is permanently assigned as “root”. Once the password is changed, the browser will display an authentication window to ask for the new password. Once the password is set, there is no provision to recover the Administrator’s password. The only option is to restore to the original factory default settings.

- 9 -

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Before You Use This Product Table of Contents Page Technical specifications Package Contents Installation Hardware installationSoftware installation Page Check Network Settings Initial Access to the Network CameraAdd Password to prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main screen with camera viewDigital Output Digital ZoomSnapshot Client settings Url http//Network Camera/protocol.html Fine-tuning for Best Performance Administrator’s capabilityFor Best Real-time Video Images Somewhere Between Real-time and Clear Images Only Quality Images Will DoProtect Network Camera by passwords Opening accounts for new usersChange homepage layout How to change the subject text of homepageMore flexible options for viewers How to change the font color How to change the backgroundPage Page How to design my own homepage to replace the current one Page Product demo for e-business large-scale service Demo on multiple sites mid-scale serviceBuild a multimedia web attraction site Page Page Image URL Build a security application Send snapshots when motion is detected Page Software revision upgrade Definition in Configuration System parameters Security settings Network settings GeneralFTP Streaming Ddns and UPnP settings Video codec parameters Page Motion detection Weekly schedule Application settingsEvent operation Sequential operation Homepage layout settings Viewing system log Restore factory default settingsViewing system parameters Reset and restore TroubleshootingStatus LED Frequently asked questions Page Page Restore factory default settings URL commands of the Network CameraCapture update Snapshot of Jpeg image Query status of the digital inputRestart system URL System resource URLGeneral format of command URL System configuration URLSecurity configuration URL Network configuration URLPassword for secondary Smtp server Ddns & UPnP configuration URL Video configuration URL Image quality configuration URL Application configuration URL Homepage layout configuration URL Technical specifications Networking

IPCAMW40 specifications

The 4XEM IPCAMW40 is a cutting-edge wireless IP camera designed for both home and professional use, delivering high-quality video surveillance to meet modern security needs. This state-of-the-art device offers an impressive array of features, technologies, and characteristics that ensure reliable monitoring and ease of use.

One of the standout features of the IPCAMW40 is its Full HD 1080p resolution, providing crisp and clear images. This level of detail is essential for identifying faces and other critical elements in the camera’s field of view. The camera also boasts a wide-angle lens, which allows for a broader coverage area, reducing the number of cameras needed for comprehensive surveillance in a space.

The IPCAMW40 utilizes advanced H.264 video compression technology. This not only enhances image quality but also reduces bandwidth consumption, making it efficient for both storage and streaming. Users can access live streaming from their smartphones or computers through a user-friendly app, offering convenience and flexibility to monitor their premises from anywhere.

Another notable aspect is its Night Vision capability. The camera comes equipped with infrared LEDs, allowing it to capture clear images in low-light conditions, ensuring round-the-clock surveillance. This feature is particularly crucial for securing properties during the night when incidents are likely to occur.

The 4XEM IPCAMW40 is designed with smart motion detection technology, which sends real-time alerts to users when movement is detected. This proactive approach enhances security by enabling users to respond quickly to potential threats. Additionally, the camera supports two-way audio, allowing users to not only listen but also communicate through the device, adding another layer of interaction.

In terms of connectivity, the IPCAMW40 supports both Wi-Fi and Ethernet, offering flexibility in installation depending on the user’s network configuration. The camera is also compatible with major smart home ecosystems, enabling seamless integration with existing home automation systems.

Robust encryption protocols ensure that video feeds are protected from unauthorized access, reinforcing the importance of security in today’s digital age. The camera’s sturdy design and IP66 weather resistance rating make it suitable for both indoor and outdoor installations, assuring durability against various environmental conditions.

In summary, the 4XEM IPCAMW40 is an advanced wireless IP camera that addresses the needs of security enthusiasts and professionals alike. With its high-resolution video, smart technology features, and reliable connectivity options, it stands out as a top choice for those looking to enhance their surveillance systems.
Top Page Image Contents