Krown Manufacturing KBS300RX instruction manual HOW Your Alarm Monitor KA300 Works

1: HOW YOUR ALARM MONITOR KA300 WORKS (CONT.)

Example:

There are 4 smoke alarms and 3

Carbon Monoxide alarms that		FIGURE 5
need to be monitor in your
household. You will need seven		Operation Code Switches
KA300TX transmitters. All
seven transmitters will be set
at the same operation code
as: 1000101010
Four transmitters installed on the smoke			The other three transmitters will be set at
detectors will be set at channel one.			channel two.
	CH3			CH3
Channel Jumper	CH2		Channel Jumper	CH2
	CH1			CH1

FIGURE 6

FIGURE 7

If you use the KA300 system with the weather channel, hurricane, tornado, or earthquake alarms combine with the fire alarm as illustrated in figure 8, you can choose for the weather alert at channel 3. Set the same house code for these KA300TX units and channel jumper to be channel 3.

INSTALL KA300 FOR SINGLE-FAMILY HOME.

FIGURE 8	Plan the location of the
	KA300RX. Refer to Figure 8 to
	find the ideal spot to install the
	receiver for your house. Hallway
	or living room will be a perfect
	spot to install the receiver.
	Since KA300 system is only an
	alarm monitor system, you must
	create a fire protection plan for
	your family and practice the plan
	to make sure that every member in
	the family knows what to do when
	the alarm triggers. Buy one or two
	KA300RX receivers and install
	them where they can be seen from
	every room in the house.

If you have a 2 story house, each story needs to have one KA300RX receiver. The programming process for the KA300RX receiver will be discussed later in Chapter 3.

3