Motorola 6866542D03 manual Conventional Mode

Page 23

Conventional Mode

In the conventional mode your radio operates as a standard two-way radio.

Select the personality number which corresponds to Conventional mode as described in Personality Selection.

Use the rotary knob (1) to select the desired channel.

Prior to transmission always make sure that the channel is free (red LED not flashing). Press the PTT (4) to transmit, release to listen. The red LED lights while the radio transmits and flashes if the channel is busy.

Some channels may be monitored for activity by pressing the Clear button (3).

In the conventional mode, the radio is equipped with a time out timer. A speech limitation alert tone will sound a few seconds before the transmitter in your radio is switched off. The call timed out tone will sound and continue until the PTT is released.

PERSONALITY

21English

Image 23

Contents Professional Radio Page Contents Computer Software Copyright Radio Overview Radio OverviewOperation and Control Functions Radio ControlsDescription OverviewProgrammable Buttons RadioSignal Description Audio Signal Tones Normal TonesAudio Signal Tones Alternative Getting Started Battery InformationBattery Care and Tips Getting StartedRecycling or Disposal of Batteries Charging the BatteryAttaching the Battery Removing the Battery Accessory InformationAttaching the Antenna Removing the Antenna Onoff Adjusting the Radio’s VolumeRadio Operation Turning The Radio On or OffRadio Registration User Absent Radio CallsMaking a Call Contact ListEnding a Call Cancelling a CallDedicated Calls Receiving a call on an Oacsu system Receiving a CallMissed Calls Call Diversion Emergency can be stopped by one of the following Emergency CallsPersonality PersonalitymptFixed and Dynamic Groups TalkgroupConventional Mode To change the personality Personality Selection

6866542D03 specifications

The Motorola 6866542D03 is a highly regarded component in the world of electronics, particularly known for its performance in mobile communication devices. Bringing together a combination of cutting-edge technologies and features, this part enhances both functionality and reliability in various applications.

One of the standout characteristics of the Motorola 6866542D03 is its advanced integration capability. This component is designed to work seamlessly with several other Motorola products, ensuring optimal performance and efficiency. Utilizing state-of-the-art semiconductor technology, it provides significant improvement in processing speed, making it suitable for high-demand environments.

The Motorola 6866542D03 is particularly recognized for its energy efficiency. In a world increasingly concerned with sustainability, energy efficiency is a crucial trait. The component is engineered to minimize power consumption without compromising on performance. This is especially beneficial in battery-operated devices where optimizing power usage translates to longer usage times and reduced frequency of recharge cycles.

Additionally, the Motorola 6866542D03 features robust signal processing capabilities. This makes it ideal for applications requiring excellent voice clarity and data transmission reliability. Superior noise reduction technologies are integrated into the design, allowing for clearer communication even in rough conditions, thereby enhancing user experience.

In terms of connectivity, the Motorola 6866542D03 is equipped with advanced protocols that support a variety of transmission media, including both wired and wireless. This versatility makes it an ideal choice for various applications, spanning from consumer electronics to industrial equipment.

Durability is another key aspect of the Motorola 6866542D03. Built to withstand environmental stresses, it is resistant to temperature fluctuations, moisture, and other potential hazards, making it suitable for outdoor and harsher conditions. This robust construction ensures longevity, thereby reducing maintenance costs.

In conclusion, the Motorola 6866542D03 exemplifies modern engineering, blending efficiency, connectivity, and durability. Its ability to perform reliably in diverse conditions makes it a preferred choice among engineers and developers, paving the way for innovative solutions in mobile communication and beyond. Whether in personal devices or industrial applications, this component continues to set high standards in the electronics industry.