LST BC016-2 manual Clear Concept

Clear Concept

The fi re detection control panel BC016-2 has been desi-	• A possible breakdown of the central processing board
gned for use in small and mid-sized systems and alrea-		is securely detected and displayed by the system.
dy in its basic version provides the following features:	•	The processor-monitored power supply ensures per-
		manent surveillance and charging of the batteries.
• 8 conventional detector lines permit the connection		This way, even during a power failure the untroubled
of automatic detectors and manual call points in con-		and uninterrupted operation (for more than 72 hours
ventional technology as well as special detectors with		depending on the design) is guaranteed.
contact output. Individual detector identifi cation can	•	Three hierarchized authorization levels for operation
be achieved by means of an optional address modu-		and parameterisation facilitate a high degree of secu-
le.		rity against unauthorized access.
• A slot for connecting the Detector Zone Extension	• The control panel is easily operated menu-driven via
MGE8-1 is available for the extension to 16 conventi-		the display and operating fi eld. Clear instructions on
onal detector lines.		the display guide the user during commissioning,
• Dry relay outputs indicate the alarm and fault condi-		operation and maintenance.
tions on the control panel. In addition, 16 open-coll-	• The parameter data can be entered either via the
ector outputs, two auxiliary inputs, and an additional		display and operating fi eld or, in a more comfortable
relay output are available for general applications.		way, created by means of the PC software PARSOFT-1
• Up to 8 alarming devices can be operated as evacu-		and loaded into the control panel. Thus, a quick and
ation circuits directly via the expanded keypad of the		effi cient transfer of the system confi guration into the
fi re detection control panel.		control panel is guaranteed.
• The optional Fire Brigade Interface FWI016-1 allows	•	After activation, the control panel is immediately rea-
for the connection of two independent transmitting		dy for operation due to the practical factory setting.
devices for a direct interconnection to a designated		This guarantees easy and time-saving commissio-
alarm respondent (e.g., the fi re brigade) as well as		ning.
for the connection of a country-specifi c fi re brigade
control unit.	The extremely fl at wall mount cabinet allows for an easy
• Outputs with open parameters and logical combina-	mounting in virtually any place of the building. Thanks to
tions of detector zones for the activation of external	its modern, ageless design, architectural requirements
controls and alarming devices allow for a maximum	and demands of the respective regulations are ideally
of fl exibility. Thus, no additional expenses arise for	combined. The compact design allows for the accom-
external relays, logic gates or timers. Using these	modation of the optional Detector Zone Extension, the
individual combinations of different types of detec-	Fire Brigade Interface, the Serial Interface Module, up
tors, even fi re protection strategies under the most	to 3 auxiliary modules (e.g., relay module, siren connec-
diffi cult circumstances can be combined into a reaso-	tion module) and batteries up to 22Ah apart from the
nable concept.	central processing board in the standard case. Series
• The LC text display shows all present events with	BC016 thus stands for modularity and easy expansion.
date and time. This allows for quick and targeted
reaction in the event of a fi re as well as for easy main-	This product complies with all relevant standards of
tenance.	EN 54 and is VdS-certifi ed. In addition, the product also
• An event memory allows for the display of the latest	holds several country-specifi c approvals and certifi ca-
200 events at any time, including all required informa-	tes. LST‘s high quality level is secured by a permanent-
tion. Thus, all system conditions and user operations	ly monitored quality management system certifi ed by
that occurred are documented in a clearly laid out	ISO 9001.
way.

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	BC016-2_DBL_LST_EN_0804.PDF • PAGE 2
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED