Clear Concept

Being the smallest version of the ﬁ re detection control panel Series BC216, the BC216-1S is designed for use in small systems and provides the following features:

•One Loop Interface LIF64-1 for the connection of detectors and modules in ADM loop technology is installed in the control panel by default. Depending on the parameterisation, either the Apollo/Discovery protocol or the System Sensor/200 protocol is used to achieve bi-directional data transfer.

•The optional Fire Brigade Interface FWI2-1 serves for the connection of 2 independent transmitting devices for a direct interconnection to a designated alarm respondent (e.g., the ﬁ re brigade) as well as for the connection of a country–speciﬁ c ﬁ re brigade control unit. By using the Fire Brigade Interface Addi- tional Board FWZ2-1, a line supervision for both of the transmitting devices is accomplished.

•The BC216-1S is able to control up to 126 detectors or modules, 128 detector zones, 128 actuations, 10 transmission devices and 99 alarming devices.

•Customizable outputs and logical combinations of detectors and detector zones for the activation of external controls and alarming devices facilitate ma- ximum ﬂ exibility. Thus, no additional expenses arise for external relays, logic gates or timers. Thanks to the wide range of parameterisation possibilities, indi- vidual requirements even under the most difﬁ cult am- bient conditions can be combined into a reasonable ﬁ re protection strategy.

•By integrating input and output modules on any positi- on in the loop you can realize enablements or disable- ments as well as control tasks in your system without having to care for additional wires.

•The free combination of detectors and modules into logic sectors allows for the joint operation of deﬁ ned parts of the system. Up to 199 sectors can be cont- rolled by the BC216-1S.

•The use of unshielded loop cables allows for cost- saving and uncomplicated installation as well as for the possibility of reusing the existing cabling.

•The LC text display shows events with the full infor- mation such as ﬂ oor, room identiﬁ cation as well as date and time. This allows for quick and targeted reaction in the event of a ﬁ re as well as for easy main- tenance.

•An event memory allows for the display of the latest 500 events at any time, including all required informa- tion. Thus, all system conditions and user operations that occurred are documented in a clearly laid out

Building Safety. Building Security.

way.

•At a central processing board failure, the diversiﬁ ed redundancy concept ensures secure alarm recogniti- on.

•The processor-monitored power supply ensures per- manent surveillance and charging of the batteries. This way, even during a power failure the untroubled and uninterrupted operation (for more than 72 hours depending on the design) is guaranteed.

•Three hierarchized authorization levels for operation and parameterisation facilitate a high degree of secu- rity against unauthorized access.

•The control panel is easily operated menu-driven via the display and operating ﬁ eld. Clear instructions on the display guide the user during commissioning, operation and maintenance.

•The parameter data can be entered either on the con- trol panel via the display and operating ﬁ eld or via a PC keyboard or, in a more comfortable way, can be created on a PC by means of the parameter setup software PARSOFT and loaded into the control panel. Thus, a quick and efﬁ cient transfer of the system con- ﬁ guration into the control panel is guaranteed.

•AUTO setup facilitates parameterisation when the control panel is commissioned or expanded and thus helps to save time.

•After commissioning, the panel‘s basic functions im- mediately make it ready for operation. A monitored siren output and dry relay contacts for alarm and fault are available by default.

The ﬂ at wall mount cabinet allows for an easy mounting in virtually any place of the building. Thanks to its mo- dern, ageless design, architectural requirements and demands of the respective regulations are ideally com- bined. The compact design allows for the accommo- dation of the Loop Interface, the auxiliary modules and batteries up to 22Ah apart from the central processing board in the standard case. If a higher battery capaci- ty is needed, an auxiliary case of the same design is available.

This product complies with all relevant standards of EN 54 and is VdS-certiﬁ ed. In addition, the product also holds several country-speciﬁ c approvals and certiﬁ ca- tes. LST‘s high quality level is secured by a permanent- ly monitored quality management system certiﬁ ed by ISO 9001.

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	BC216-1S_DBL_LST_EN_0804.PDF • PAGE 2
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED

BC216-1S specifications

The LST BC216-1S is a cutting-edge solution in the realm of advanced technology devices. Built with an array of features designed to empower users, the LST BC216-1S represents an exceptional blend of functionality, efficiency, and user-friendly design.

One of the standout features of the LST BC216-1S is its compact and lightweight design. This ensures it is portable and convenient for both personal and professional use. Whether you are on the go or stationed at your desk, the device can easily fit into various environments without compromising on performance.

In terms of connectivity, the LST BC216-1S is equipped with the latest wireless technology, enabling seamless integration with a range of devices. Its Bluetooth capabilities ensure easy pairing with smartphones, tablets, and computers, while its Wi-Fi functionality provides reliable internet access for cloud-based applications and services.

The display of the LST BC216-1S is another highlight, featuring high resolution and an intuitive interface. Users can navigate through applications and settings with ease, enjoying crisp visuals and vibrant colors. The responsiveness of the touch interface makes it easy for users to access features swiftly, enhancing overall productivity.

Power efficiency is a critical consideration in modern technology, and the LST BC216-1S does not disappoint. It incorporates advanced power management technologies that extend battery life, allowing users to enjoy uninterrupted usage for extended periods. This feature is particularly advantageous for those who rely on their devices throughout the day.

Performance-wise, the LST BC216-1S is powered by a robust processor that supports multitasking and demanding applications. Whether for gaming, media consumption, or professional work processes, the device delivers smooth performance without lag.

Lastly, the build quality of the LST BC216-1S is impressive. Constructed with durable materials, it can withstand the rigors of daily use while maintaining its sleek appearance. This reliability, combined with its aesthetic appeal, makes it an attractive option for a wide range of users.

In conclusion, the LST BC216-1S stands out as a versatile and powerful device, offering an impressive combination of features and technologies that cater to the needs of modern users. Its portability, connectivity options, efficient power management, and robust performance make it a remarkable choice for both personal and professional applications.