Linksys KVM2KIT manual Table of Contents

ProConnect™ Series

Table of Contents

System Requirements	3
Step 1: Install the
Integrated KVM 2-Port Switch	3
Step 2: Use the Hot Key Combinations
for the Integrated KVM 2-Port Switch	5
Specifications	8
Contact Information	9

This Installation Guide is meant to help you install the Integrated KVM 2-Port Switch quickly and easily. For additional information, visit the Linksys website at www.linksys.com

Integrated KVM 2-Port Switch

System Requirements

Console

•One VGA, SVGA or Multisync Monitor Capable of the Highest Resolution You Will Be Using on Either Computer

•One PS/2 Keyboard

•One PS/2 Mouse

Either Computer

•One VGA, SVGA, or Multisync Monitor Capable of the Highest Resolution You Will Be Using on Either Computer

•One PS/2 Keyboard

•One PS/2 Mouse

Step 1: Install the Integrated KVM 2-Port Switch

A.Power down the monitor and computers before you install the KVM Switch. Unplug the power cords of any computers that have the Keyboard Power On function; otherwise, the KVM Switch will receive power from those com- puters. Then make sure all devices you are connecting are properly ground- ed.

Note: The connectors on the built-in cables are color-coded to match the appropriate ports on your computers; however, double-check each connector’s icon before you make the physical connection.

B.Connect the monitor’s cable to the monitor port on the KVM Switch.

C.Connect the PS/2 keyboard’s cable to the PS/2 keyboard on the KVM Switch.

D.Connect the PS/2 mouse’s cable to the PS/2 mouse port on the KVM Switch.

2 3