Linear AE-2000 Entry System Mounting, Opening and Closing the Cabinet, Mounting Preparation

Page 8

Entry System Mounting

The AE-2000 cabinet is designed to be mounted three ways:

•The unit can be mounted directly to a wall or fl at surface.

•The unit can be mounted recessed into the wall.

•The unit can be mounted on a standard gooseneck pedestal. Choose a well lit location near the controlled opening. Wiring access for power, telephone, earth ground, control output must be available to the mounting location. If the optional remote accessories are used, wiring access for these cables must also be available to the mounting location.

Opening and Closing the Cabinet

The AE-2000’s cabinet hinges are spring loaded to help weather seal the cabinet. To open the cabinet, press the cabinet door firmly around each lock while turning each key counterclockwise. To close the cabinet, press the cabinet door firmly around each lock while turning each key clockwise.

Mounting Preparation

Before mounting the system, the main circuit board mounting plate must be removed to provide access for the wiring hole and mounting fasteners.

✦CAUTION!: Touch a grounded object before proceeding to discharge static electricity from your body.

1GROUND WIRE STUD

CAREFULLY REMOVE THE FIVE WIRING HARNESS CONNECTORS & GROUND WIRE

MOUNTING

PREPARATION

2

LOOSEN THE TOP TWO NUTS & REMOVE THE BOTTOM TWO NUTS

1.Carefully remove the fi ve main circuit board wiring connectors:

• The CPU/interface ribbon cable connector.

• The processor module power connector.

• The telephone interface connector.

• The tamper switch connector.

• The keypad power connector.

2.Remove the nut from the Earth Ground stud and remove the green ground wire lug from the stud.

3.Remove the two bottom circuit board mounting plate nuts.

4.Loosen the two top circuit board mounting plate nuts.

5.Carefully lift up on the mounting plate, removing the circuit board mounting plate. Set it aside in a safe place.

Reverse these steps to replace the circuit board mounting plate after the cabinet mounting is complete.

Surface Mounting

The cabinet can be mounted on a wall or any suitable fl at surface. The four 3/8” mounting holes or the four self-drill locations can be used to attach the cabinet to the surface.

1.For wall mounting, hold the cabinet at the approximate mounting location where the display will be about eye level or slightly above.

2A. If using the 3/8” mounting holes, mark the four mounting hole centers. Drill as required. Use the appropriate fasteners for the mounting surface to secure the cabinet.

2B. If using the self-drill mounting holes, choose the correct size bit for the fasteners and drill the cabinet as required. Use the appropriate fasteners for the mounting surface to secure the cabinet.

3.After routing the wiring into the cabinet, replace the circuit board mounting plate and plug in the wiring connectors. Be sure to replace the green ground wire.

3CAREFULLY REMOVE THE CIRCUIT BOARD

SURFACE

MOUNTING

OR

1 MARK THE FOUR MOUNTING HOLES

DRILL THE CABINET AT THE

PRE-MARKED LOCATIONS

2

ATTACH THE CABINET WITH APPROPRIATE

 

HARDWARE FOR THE MOUNTING SURFACE

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents AE-2000 Operation ContentsIntroduction Software Highlights Hardware FeaturesFeature Overview Wiegand Accessories Accessory OverviewPbus Accessories Switch Component LocationsWiring Diagram This Wiring Example ShowsImportant Mounting Requirements Entry System Mounting Opening and Closing the CabinetMounting Preparation Surface MountingRecessed Mounting Pedestal MountingRelay Output Wiring Door or Pedestrian Gate ControlGate Control Request-to-Exit InputsPower, Battery, & Ground Wiring Power WiringBackup Battery / Uninterruptable Power Supply Earth GroundTelephone Wiring Important Telephone Wiring TipsTypical Telephone Wiring Optional Radio AntennaPostal Lock Installation Camera InstallationOptional Postal Lock Optional Color Cctv CameraPbus Accessories Wiegand AccessoriesMount and install the units for the network Optional Network ConnectionNetwork with Hub Network Daisy-chainSystem Adjustments On-board Display Internal ControlsOn-board Pushbuttons Resident Access with an Entry Code Resident Access with a Wireless TransmitterVisitor Access with a Resident Call AE-2000 OperationDimension Drawing SpecificationsTroubleshooting

AE-2000 specifications

The Linear AE-2000 is a cutting-edge wireless audio system designed to deliver high-quality audio transmission for a variety of applications. This versatile system is particularly well-suited for professional environments such as theaters, concert halls, and corporate events, where reliable sound is crucial.

One of the main features of the AE-2000 is its advanced digital signal processing technology. This ensures that audio signals are transmitted with minimal latency, providing real-time sound reproduction that is vital for live performances and presentations. The system supports a wide frequency range, allowing it to capture the nuances of speech and music with exceptional clarity.

In addition to its high-quality audio capabilities, the AE-2000 boasts an impressive range of wireless connectivity. Utilizing the latest RF technology, this system can operate over long distances without the risk of interference, making it ideal for large venues where mobility and flexibility are needed. The system offers multiple channels, allowing several users to operate simultaneously without loss of sound quality or clarity.

Another notable characteristic of the AE-2000 is its ease of use. The user-friendly interface allows for quick setup and configuration, making it accessible for both seasoned professionals and newcomers alike. It features intuitive controls, including a digital display that provides real-time information on battery life, signal strength, and channel selection. This streamlined operation helps to reduce setup time, allowing users to focus on delivering quality audio content.

The AE-2000 system also incorporates robust build quality, designed to withstand the rigors of transport and heavy use. Its construction not only ensures durability but also aids in reducing unwanted vibrations and handling noise, which can detract from audio quality.

Moreover, the AE-2000 is designed for versatility, accommodating a range of audio sources. Whether connecting microphones, instruments, or line-level sources, this system provides the necessary inputs and outputs to meet diverse sound engineering needs.

In summary, the Linear AE-2000 wireless audio system stands out due to its high-definition audio quality, reliable wireless connectivity, user-friendly design, robust construction, and versatile compatibility with various audio sources. It is an ideal choice for professionals seeking a dependable solution for their audio transmission needs.
Top Page Image Contents