Operating the Enforcer 190 / 190S

MOUNTING THE DETECTOR

It therefore should be mounted in a location within which every glass window and door to be protected is found. For greatest security, attach to the wall or ceiling, using screws instead of double-sided foam tape. For larger areas, two or more units can be used without fear of interfering with each other.

SETTING THE SENSITIVITY

The ENFORCER 190/190S includes SECO-LARM'sunique patented Yellow turbulence LED. This LED flashes when environmental noise is high enough to cause false alarms, thereby allowing instant sensitivity setting without the use of a special external test meter.

To set sensitivity, hold a thin flexible plastic ruler flat against a glass window within the unit's protection range.

Pick up one end of the ruler while holding the other end down, and then let the ruler snap against the glass window. This

should cause the Yellow LED to come ON, MIN MAX but the Red LED should not light. If the

Red LED comes ON with a slight snap, the ENFORCER 190/190S may be too sensitive, and the sensitivity control should be turned counterclockwise with a small flat or phillips screwdriver. If the Yellow LED does not come ON, sensitivity should

be increased by turning the control clockwise. Continue snapping the ruler on the window until the Yellow LED comes ON but the Red LED does not. Repeat this process with each window to ensure the ENFORCER 190/ 190S is set for every pane of glass.

When the correct sensitivity is found using the above procedure, determine whether the sensitivity is high enough to trigger the alarm by snapping the ruler harder to simulate a break-in. If the Red LED does not come ON, the sensitivity must be increased.

NOTE: For applications within this temperature range the sensitivity will be stable. If the temperature should drop below -14°F (-10°C), the sensitivity of the ENFORCER 190/190S will increase, and the sensitivity setting will need to be decreased. If the temperature should rise above 122°F (50°C), the sensitivity of the ENFORCER 190/190S will decrease, and the sensitivity setting will need to be increased.

When setting sensitivity, make sure the room's environment is as close as possible to what it will be when the ENFORCER 190/190S is in use. For instance, if the curtains are usually closed at night when the alarm is armed, then set sensitivity with the curtains closed. If a window in the room is left opened, then set the sensitivity with window open. The sensitivity should always be retested when the environment of the room changes, such as when furniture is moved.

Depending on the type of glass, sensitivity is different when set by tapping the inside or outside of the window with a ruler. For best results, tap the inside of the window.

NOTE: DO NOT SET SENSITIVITY ANY HIGHER THAN NECESSARY TO PROTECT THE GLASS IN THE DETECTOR'S RANGE. SETTING SENSITIVITY HIGHER THAN NEEDED INCREASES THE CHANCE OF FALSE ALARMS WITHOUT INCREASING PROTECTION. LEAVING A DOOR OR WINDOW OPEN WILL ALSO INCREASE THE CHANCE OF FALSE ALARMS.

TAMPER-PROOFING CASE

For extra protection, the ENFORCER 190/190S is equipped with an N.C. Tamper Switch to protect against opening or breaking of the case.

INSTALLATION

SCREW TERMINALS:

#7: N.C. TAMPER OUTPUT

#6: COMMON TAMPER OUTPUT #5: COMMON GROUND

#4: 12VDC

#3: DRY RELAY N.O.*

#2: DRY RELAY COMMON* #1: DRY RELAY N.C.*

*For N.O. output, use Terminals 2 and 3 For N.C. output, use Terminals 2 and 1

190, 190S specifications

SECO-LARM USA is a renowned manufacturer of security and automation products, and among its standout offerings is the SECO-LARM USA 190 and 190S series. These models are particularly known for their reliability and advanced capabilities, making them essential components in various security systems.

One of the main features of the SECO-LARM USA 190 and 190S is their robust design. These devices are built to withstand various environmental conditions, ensuring they can perform seamlessly in both indoor and outdoor settings. Their durable casing helps protect against dust and water, which is critical for devices exposed to the elements.

Both the 190 and 190S models utilize advanced technologies that enhance their functionality. They are equipped with infrared sensors, allowing for effective motion detection. This feature is invaluable for security applications, as it enables the devices to identify unauthorized movements in their vicinity, triggering alerts or activating connected systems.

Another notable characteristic of these devices is their ease of installation and integration. The SECO-LARM USA 190 and 190S are designed with user convenience in mind, featuring a plug-and-play setup that simplifies the installation process. This user-friendly design allows for seamless integration into existing security frameworks without requiring extensive modifications.

The versatility of the SECO-LARM USA 190 and 190S series cannot be overlooked. These models are compatible with a variety of security systems and can be utilized in residential, commercial, and industrial applications. Their adaptability makes them suitable for a wide range of scenarios, from home security setups to complex surveillance projects.

In terms of performance, the SECO-LARM USA 190 and 190S excel in providing accurate and timely notifications. The advanced algorithms utilized in their design ensure that false alarms are minimized, allowing users to respond quickly to genuine security threats. This reliability in performance is critical for users who depend on these devices to safeguard their properties.

Additionally, these models often come with customizable settings, allowing users to tailor the sensitivity and response capabilities to best suit their specific needs. This level of flexibility enhances their effectiveness and ensures that users can maximize their security measures.

Overall, the SECO-LARM USA 190 and 190S series stand out due to their robust construction, advanced technologies, ease of installation, versatility, and reliable performance. These features combine to create a solution that not only meets but exceeds the expectations of security professionals and consumers alike.