SECO-LARM USA EVT-PB1-H05Q manual Specifications

ENFORCER Video, Power and Data Balun with Voltage Booster

Specifications:

						EVT-PB1-H05Q
	Output voltage			5/12/24VDC selectable by jumper (default 12VDC)
Booster				Input voltage				Regulated output voltage
	Operating voltages			7~12VDC/VAC				12VDC
				12~24VDC/VAC				24VDC
	Output current				500mA @ 5/12/24 VDC
Voltage	Voltage input LED						Green
	indicator
	Voltage output LED		Red					5/12VDC
	indicator		Blue					24VDC
	Current protection						PTC 500mA
	Range			2,000’ (610m) B/W, 1,300’ Color (400m)
	Video format				RS170, NTSC, PAL, SECAM, CCIR
Video	Maximum input						1vp~p
	Insertion loss				< 2dB per pair from DC ~ 5 Mhz
	Return loss				>-15dB from DC ~ 5 Mhz
	Common mode rejection				60dB, 15KHz~5MHz
	Frequency response						DC ~ 5 Mhz
	Power				No power required for video
	Wire type				UTP (unshielded twisted pair)
	Wire category			20 - 24 AWG @ screwless terminal blocks
Connections				CAT2 or better, CAT5 ideal, CAT6 improves range
		In					Removable terminal block
	Connectors				Video		Pigtail BNC
		Out			Power		Pigtail DC plug (center pin positive)
					Data		Wire
	Attenuation				DC ~ 5 Mhz, 1.5 dB max
	Impedance				Coax, male BNC: 75 Ohms@ 1 MHz
					Terminal block: 100 Ohms @ 1 MHz
Other	Dimensions				3 1/4" x 2 9/16" x 3/4" (81 x 65 x 20mm)
	Humidity range						0 ~ 95%
	Temperature Range				14°~165°F (-10°~74°C)
	Case						ABS Plastic

NOTE: The VPD balun with voltage booster’s efficiency rating is 85%. For more information see “Voltage Booster Efficiency Rate” on page 3.

Figure 1: Video, Power and Data Balun with Voltage Booster Detail

Power input LED	Dual-colored output LED
Power +
Power –
Video +	VDC out
Video –
Data +	Video in
Data –	Data out
Voltage selection jumper	Adjustable output voltage knob

2 SECO-LARM U.S.A., Inc.