Klipsch Floorstanding Speaker Important Safety Instructions, Unpacking and Assembling the Speaker

Page 2

REFERENCE SERIES

IMPORTANT SAFETY INSTRUCTIONS

1.READ these instructions.

2.KEEP these instructions.

3.HEED all warnings.

4.FOLLOW all instructions.

5.DO NOT use this apparatus near water .

6.CLEAN ONLY with dry cloth.

7.DO NOT block any ventilation openings.Install in accordance with the manufacturer's instructions.

8.DO NOT install near any heat sources such as radiators,heat registers,stoves,or other apparatus (including amplifiers) that produce heat.

9.DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.PROTECT the power cord from being walked on or pinched,particularly at plugs,conve- nience receptacles,and the point where they exit from the apparatus.

11.ONLY USE attachments/accessories specified by the manufacturer.

12.USE only with a cart,stand,tripod,bracket,or table specified by the manufacturer, or sold with the apparatus.When a cart is used,use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14.REFER all servicing to qualified service personnel.Servicing is required when the apparatus has been damaged in any wa y, such as power-supply cord or plug is damaged,liquid has been spilled or objects have fallen into the apparatus,the apparatus has been exposed to rain or moisture,does not operate normally, or has been dropped.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

UNPACKING AND ASSEMBLING THE SPEAKER

NOTE: Although this loudspeaker can be unpacked and set up by a single person,a helper will make the job easier, not to mention safer, for speaker and owner alike.

The easiest way to remove the speaker from its carton is to turn the open end of the box down so that it is resting on the floor, with the flaps spread out and away. Then pull the box straight up and off.Remove any packing material from the speaker and grille,place it back in the carton, and store in case you ever need to ship the loudspeaker. Locate the speaker’s four stabilizing feet and retaining screws,which are needed for the next step.

If the speaker is not already standing on its head,carefully turn it over so that the bottom is fac- ing up.Near the corners are threaded inserts for attaching the feet.For each one,take one of the supplied feet and align it so that its screw hole is over the insert.Thread one of the supplied screws through and tighten it firmly with a phillips-head screwdriver. (See Figure 1.)

Figure 1

Once the feet are attached,install either a carpet spike or a rubber tipped bolt into the threaded insert in each foot.The best sonic performance on carpeted surfaces will be achieved by using the supplied spikes.Then,carefully turn the speaker right side up.Once installed,the speaker must be lifted when moved to avoid carpet damage.The spikes are sharp; keep your feet clear!

WARNING: To reduce the risk of fire or electrical shock,do not expose this apparatus to rain or moisture.

RISKOFELECTRICSHOCK

DONOTOPEN

WARNING: Voltages in this equipment are hazardous to life.No user-serviceable parts inside. Refer all servicing to qualified service personnel.

CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this device.

ABOUT YOUR KLIPSCH PURCHASE

Thank you for your purchase of Klipsch floorstanding loudspeakers.After reading this manual and connecting your system,you will hear the result of over 55 years of stringent engineering and class-leading research and development.Like all Klipsch products,your floorstanding loudspeakers feature Klipsch Tractrix® Horn-loaded Technology—the guiding design for the first Klipschorn® developed in 1946 and for every product that has followed.Horn-loading allows your speakers to deliver high sensitivity, low distortion, flat frequency response and wide dispersion,which translates to unequaled power, detail and dynamics,the hallmarks of “The Klipsch Sound.”Please be sure to fill out the warranty card at the back of this manual or online at www.klipsch.com so we are better able to serve you.Again,thank you for choosing Klipsch and we hope that your speakers bring life to your music and movies for many years.

Align the magnetic posts on the inside of the grille with the screws on the front of the speaker, and it will snap into place.

PLACEMENT

Although your Reference Series speakers will perform well in a wide variety of locations,you will get the most out of them by following some simple guidelines:

•The speakers require a few inches of clearance behind them to allow their ports to breathe,and they will sound best when they are at least two feet (60 centimeters) from any nearby walls.

•If possible,arrange both speakers so that they are equal distances from the floor and the wall behind them.It can also help to have the left and right speakers at different distances from their nearest side walls.This sort of staggering helps smooth the bass range.

•Any speaker’s bass output and response is strongly influenced by its distance from room boundaries, such as walls and the floor. Moving a speaker closer to a room boundary will increase its bass output, while moving it away will reduce the bass. Following the suggestions above will typically yield good results with Klipsch Reference Series floorstanding speakers, but you may find that you can “fine-tune” the sound by moving them slightly from side to side or front to back until music recordings with strong bass content sound just right to you. Don’t be afraid to experiment.

Two-Channel Stereo System - Figure 2 shows a typical speaker arrangement for a two-channel stereo system. A good starting point is to create an equilateral triangle with the speakers and your listening position. Depending on the size of the room and the furniture arrangement, you may find

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Reference Floorstanding Loudspeakers Unpacking and Assembling the Speaker Important Safety InstructionsPlacement About Your Klipsch PurchaseConnections But First Types of ConnectorsSpeakers to Amplifierkeeping IT Straight WARRANTY- U.S. and Canada only Bass Management SettingsCare and Cleaning Warranty Outside the United States and CanadaImportantes Consignes DE Sécurité Enceintes À Amplificateur Respect DE LA Polarité RaccordementsTout D’ABORD Types DE Connecteurs Garantie À Lextérieur DES ÉTATS-UNIS ET DU Canada Réglages DE Gestion DES GravesEntretien ET Nettoyage Wichtiger Sicherheitshinweis PlatzierungLautsprecher ZU Verstärkerdirekte Verbindung AnschlüsseErster Schritt Anschlussarten Pflege UND Reinigung BASS-MANAGEMENT-EINSTELLUNGENUsare Solo gli accessori specificati dal produttore Leggere Queste Istruzioni ConservarleConnessioni Tipi DI ConnettoreGaranzia Applicabile Fuori Degli USA E DEL Canada Impostazioni PER LA Gestione DEI BassiCura E Pulizia Disposição Instruções Importantes DE SegurançaSobre a SUA Compra DE Produtos Klipsch DA Caixa Acústica Para O Amplificadormantendo Alinhado ConexõesMAS Primeirotipos DE Conectores Garantia Fora DOS Estados Unidos E Canadá Configurações DE Gerenciamento DE GravesManutenção E Limpeza Impimportantes Instrucciones DE Seguridad UbicaciónConexiones Pero Primerotipos DE ConectoresGarantía Fuera DE LOS Estados Unidos Y Canadá Configuración DE Administración DE BajosCuidado Y Limpieza Page =Y=Z Page Please tell us about you Woodview Trace, Suite Indianapolis, Indiana 46268 USA

Floorstanding Speaker specifications

Klipsch floorstanding speakers are renowned for their exceptional audio performance and robust build quality, making them a favorite among audiophiles and casual listeners alike. These speakers are designed to deliver an immersive listening experience, ideal for home theater setups, music playback, and gaming. Klipsch's commitment to innovation and sound quality shines through in their floorstanding speakers, which feature a range of advanced technologies and characteristics.

One of the standout features of Klipsch floorstanding speakers is their Tractrix Horn technology. This unique design enhances high-frequency response and improves the efficiency of sound delivery. By directing sound waves toward the listener, Tractrix Horns reduce unwanted reflections and provide clarity in dialogue and musical detail, offering a more engaging experience. The combination of a horn-loaded tweeter with copper-spun woofers also contributes to a balanced sound profile, ensuring that listeners can enjoy the full dynamic range of their favorite audio content.

Another notable characteristic of Klipsch floorstanding speakers is their robust construction. Made with high-quality materials, these speakers often feature a veneer finish that adds a touch of elegance to any room. The sturdy cabinets are designed to minimize resonance and ensure that sound remains clear and undistorted, even at higher volumes. Additionally, some models include magnetic grilles that offer a seamless aesthetic while protecting the drivers from dust and damage.

Many Klipsch floorstanding speakers also include integrated bass ports that enhance low-frequency performance. This design allows for deeper, more impactful bass response, which is critical for achieving a full-bodied sound. Whether it’s the subtle nuances of a classical orchestra or the thunderous explosion of an action film, Klipsch speakers excel in delivering powerful audio across all genres.

For those who seek versatility, some Klipsch floorstanding models are designed to be compatible with wireless streaming technologies, enabling users to connect their devices effortlessly. Moreover, Klipsch speakers are often engineered to work seamlessly with a variety of home theater systems, making them an excellent choice for building a comprehensive audio setup.

In summary, Klipsch floorstanding speakers are a prime choice for those seeking superior sound quality, elegant design, and advanced technology. With features like Tractrix Horns, robust construction, and integrated bass ports, these speakers provide a listening experience that is both immersive and enjoyable, catering to the needs of all audio enthusiasts.
Top Page Image Contents