Installation

nThe horizontal view angle of the Smoke Detector Camera is 78-degree. Decide the location to install the camera.

Full-Screen Width of View

=1.6 X Distance between Camera and Target

oInspect the package contents to make sure that no damage occurred during shipping.

ZPlug in the attached video and power cable to the camera connector.

[Connect the video output of the camera to a color monitor or other video device through a 75 ohm type coaxial cable with BNC female connector at cable extension.

\Connect the 12VDC regulated power source of the camera to the 12VDC Power-in jack with 2 mm, center+, outer-plug.

]Adjust the direction of the lens as per needed.