5. INSTALLATION(Plastic Dome)
1.Attach the Low Profile Dome on the ceiling using the screws provided. Considering the camera angle required for the viewing angle.
2.Adjust the Lens Angle to the desired location.
TAPPING SCREW (4 x 20L) - 3EA
3.Connect the Service Video Output Cable and check the video image. Change the Settings accordingly using the OSD Controller.
OSD CONTROLLER
SERVICE VIDEO TEST CABLE 
<TILT ANGLE : 20~90°> | <PAN ANGLE : ±10°> |
| TILT: 0° |
| TILT: +20° |
| PAN: ±10° |
TILT: +90° |
|
| PAN: 0° |
4. After adjusting the Lens, install the Top Cover.
ASSEMBLY HOOK
(2 point)
TOP HOUSING 
(Direction of Separation)
TOP HOUSING
(Assembly direction)
M4 STAR SCREW
10