Introduction

2.1Description

The DMP XR6A/XR10A/XR20A Command Processors are powerful 12 VDC burglary and fire communicator panels with battery backup. The XR10A/XR20A provide nine on-board burglary zones and one on-board 12 VDC Class B powered fire zone. The XR6A provides five burglary and one fire zone. The fire zone has a reset capability to provide for 2-wire smoke detectors, relays, or other latching devices. The XR6A/XR10A/XR20A can communicate to one or two DMP SCS-1 Receivers using SDLC digital dialer, 4-2, or Contact ID (CID) reporting formats. In addition, the XR20A can communicate using the Radionics Modem IIe format.

2.2System configurations

The XR6A/XR10A/XR20A can be programmed to operate as either an All/Perimeter system that provides one Perimeter area and one Interior area, or as a Home/Sleep/Away system that provides one Perimeter, one Interior, and one Bedroom area. The Bedroom area can include any protection devices the user wants disarmed during their sleeping hours and armed in the Away mode. In addition, the XR20A can operate as a four area system.

2.3Before you begin

Before installing the XR6A/XR10A/XR20A, we recommend you read through the entire contents of this guide. Familiarize yourself with the features of the panel and the key points to remember during the installation. Be sure to read and understand all of the caution statements printed in bold italics.

In addition to this installation guide, you should also read through and familiarize yourself with these other product documents:

•	XR6/XR10 Programming Guide (LT-0230)	•	XR20 Programming Guide (LT-0305)
•	XR6/XR10 Program Information Sheet (LT-0212)	•	XR20 Program Information Sheet (LT-0302)
•	XR6/XR10 Security Command User's Guide (LT-0226) •		XR20 Security Command User's Guide (LT-0303)

2.4About this guide

The information contained in this guide is organized into three sections: Table of Contents, Introduction, and Installation.

•The Table of Contents at the front of this guide lists all of the headings and subheadings used throughout each section and the page number where the information can be found.

•The Introduction section gives you an overview of the various components that go into a XR6A/XR10A/ XR20A system and diagrams some typical system configurations. This section gives descriptions of the panel, keypads, and accessory modules and provides details on how each of them operate together in the system.

•The Installation section begins with mounting instructions for the enclosure and takes you through the proper way to power up the panel prior to programming.

Caution notes

Throughout this guide you'll see caution notes containing information you need to know when installing the XR6A/XR10A/XR20A panel. These cautions are written with a bold, italicized introductory clause followed by a detailed description of the caution. See the example shown below:

Always ground the panel before applying power to any devices: The XR6A/XR10A/XR20A must be properly grounded before connecting any devices or applying power to the panel. Proper grounding protects against Electrostatic Discharge (ESD) that can damage system components.

Whenever you see a caution note, make sure you completely read and understand its information. Failing to follow the caution note can cause damage to the equipment or improper operation of one or more components in the system.

2.5How to use this guide

To locate information about the installation of the XR6A/XR10A/XR20A, first go to the Table of Contents at the front of this guide. Find the subject heading that closely describes the information you need and turn to the section number shown to the right of the heading.

The text that follows the heading has been written to provide as much information about the subject as possible. If you can't find the information you need under that heading, try scanning through a few of the headings before and after and reading the text under those that sound similar.

XR6A/XR10A/XR20A Installation Guide

Digital Monitoring Products

2841 E. Industrial Drive Springfield, MO USA 65802-6310 800-641-4282

Page 2

XR10A, XR6A, XR20A specifications

DMP Electronics has made a significant impact in the realm of advanced audio solutions with its innovative products, particularly the XR6A, XR20A, and XR10A models. Each of these devices is engineered to meet the evolving needs of audio enthusiasts, home theater setups, and professional environments, combining state-of-the-art technology with a commitment to exceptional performance.

The XR6A stands out with its impressive audio clarity and power output. This model incorporates advanced digital signal processing (DSP) to deliver superior sound quality across all frequencies. The XR6A is tailored for medium to large room applications, featuring multiple input options, including Bluetooth connectivity, allowing users to effortlessly stream music from their devices. The rugged construction ensures longevity and reliability, while the intuitive control panel makes operation straightforward.

In contrast, the XR20A targets professionals seeking a robust audio solution for live settings. With its high wattage output and multiple channel capabilities, the XR20A is designed for versatility. It features advanced technology such as automatic feedback suppression and multi-band compression, ensuring optimal sound quality even in challenging acoustical environments. The onboard EQ allows for precise adjustments, making it suitable for both music and voice applications. Additionally, the XR20A is equipped with a durable housing, making it ideal for touring and live performances.

The XR10A, while slightly smaller, does not compromise on quality or performance. This model is perfect for compact spaces and entry-level users, providing a simplified yet powerful audio experience. The XR10A utilizes high-efficiency Class D amplification, which not only enhances sound reproduction but also reduces energy consumption. This model is particularly appealing to home users and small event organizers, as it offers easy connectivity options and user-friendly controls.

All three models—XR6A, XR20A, and XR10A—boast exceptional thermal management systems, ensuring consistent performance even during prolonged use. The incorporation of premium components throughout each unit exemplifies DMP Electronics' dedication to high-quality manufacturing and innovative design. With a range of features tailored for different applications and user needs, these models represent the pinnacle of audio technology, making them a top choice for those seeking unparalleled sound performance. Whether for personal use, professional gigs, or home installations, the XR series meets the demands of diverse audio environments with ease and sophistication.