Kenmore 153.327666, SHORT Installation instructions, Tonid, Facts to Consider About Location

Page 7

installation instructions

Facts to Consider About the

Location

You should carefully choose an indoor location for the new water heater, because the placement is a veI3, important consid- eration for the safety of the occupants in rkle building and for the most economical use of the appliance This water heater is not intended for outdoor installation.

Whether replacing an old water heater or putting the water heater in a new location, the following critical points must be observed.

The location selected should be indoors as close to and as centralized with the water piping system as possible. This water heater, as well as all water heaters, will eventually leak_ Do not install without adequate drainage provisions where water flow will cause damage..

CAUTION

WATER HEATERS EVENTUALLY LEAK= Installation of the water heater must be accomplished in such a manner that if the tank or any connections should leak, the flow of water will not cause damage to the structure. For this reason it is not advisable to nstal the water heater in an attic or upper floor. When such locations cannot be avoided, a suitable drain pan should be installed under the water heater° Drain _ans are available at your local Sears Store. Such a drain pan must be piped to an adequate drain. Under no circumstances is the manufacturer or Sears to be held liable for any water damage in connection with this water heater.

ACAUTION

INSTALLATION IN RESIDENTIAL GARAGES: The water heater must be located andlor protected so it is not subject to physical damage by a moving vehicle.

(toni'd)

Facts to Consider About The

Convertible Lower Element

The Upper Element (if a double element model), is a conven- tional 3800 watt element which only operates at its rated wattage on 240 volts (See rating plate on water heater)

The Lower Element of the water heater can be converted from operation at 3800 watts to 5500 watts on a 240 volt system.

Read and follow water beater warnings and instructions If after reading these instructions in this manual, if you do not under- stand any portion, call Sears Service Center.

AWARNING

Before making the conversion to 5500 watts, check the

AWI) power supply..must be 240 volts, (2) wiring... 10 gauge

G, Type TW, 60°C or equivalent, and (3) Circuit breakers or fusing...capabte of 30 amp loading. Also, the installation must conform with this manual, local codes

and electric utility rules. Failure to comply can result in

DEATH, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE.

•The location selection must provide adequate clearances for servicing and proper operation of the water heater.

NOTE: Whether or not the element conversion is made the

model rating plate must be marked_ Using a hardpoint ink

pen, check the appropriate block within the model rating plate, which is located adjacent to the lower access panel.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Hodel No ManualAwarning Safety PrecautionsContents 5500 Product SpecificationsRing for the New @90E RiseFoot Tape or Folding Rulo Pipe Wrench ScrewdriverGarden Hose Drill Pipe Dope or Teflon Tape Water passingour=lye Removing the Old Water HeaterFacts to Consider About Convertible Lower Element Installation instructionsTonid Facts to Consider About LocationInstallation instructions contd WARNIfNG Relief ValveConverting the Lower Element Filling the Water HeaterResult in DEATH, Serious Bodily Injury or Property Damage S5OOW Lower Element Contd ContdINJUR, or Property Damage Wiling Diagrams Installation Instructions contdInstallation Instructions contd Model Rating Plate Installation ChecklistTemperature Settings Service and AdjustmentThermostatsAdjustment Temperature RegulationDraining AdjustmentTemperature=Pressure Relief Lower Thernostat Adjustable Through Lower Access PanelOUS Bodily INJURY,OR Property Damage Service and Adjustment contdElement Cleaning Replacement Hazard of Electrical SHOCK! Before removingPovr Hazard of ELEC-K Element Cleaning Replacement contdDrain Valve Washer Replacement ServiceI1Ii Thermal Expansion Tank SpecificationsExpansion Tank Sizing Chart Start Up ConditionsOperational Conditions Troubleshootin GuideWater is TOO HOT ContdLeakage Checkpoints =rPou eshooting Guide contdOres Model PamtsOrder ListIjnmore P&ER Miser z9 Electric W-ERHEATEPS Parts Order List contd Iol .Th Parts Order List contd Parts rder List contd Sears Installation Warranty Sears Installation Policy About Your Warranty

153327465 40 GAL, 153.327865, 327266_J 40 GAI SHORT, 153 327566 50 GAE, 153327265 40 GA! SHORT specifications

The Kenmore 153327166 30 GAI Short and its related models, including the 153.327865 40 GAI Short and 153.327265 40 GAI Short, represent a line of high-performance appliances designed for efficiency and convenience. Known for their reliability and innovative features, these models cater to a variety of household needs.

The Kenmore 153327166 30 GAI Short is engineered with a focus on user-friendly operation and modern technology. One of its standout features is the advanced gas control system, which ensures optimal energy consumption, providing significant cost savings over time. This model includes an intuitive interface that allows users to easily adjust settings, making cooking more manageable for both novice and experienced chefs.

The 153.327865 40 GAI Short model is particularly notable for its spacious cooking area, allowing users to prepare multiple dishes simultaneously. Its high BTU burners deliver rapid heating, ensuring swift meal preparation. Additionally, this model is equipped with sophisticated safety mechanisms such as automatic shut-off technology, which enhances user safety while cooking.

Another important aspect of the Kenmore 40 GAI Short models, including the 153.327265 variant, is the easy-to-clean design. With smooth surfaces and removable components, maintaining the appliance is hassle-free. These models also incorporate durable materials that withstand the rigors of daily use, ensuring long-lasting performance.

In terms of aesthetics, the Kenmore appliances blend seamlessly with modern kitchen designs. Their sleek finishes and contemporary styling enhance the overall look of any home. Moreover, these models are designed with energy efficiency in mind, adhering to certification standards that minimize environmental impact.

The Kenmore 153327166 and its associated models are equipped with cutting-edge cooking technologies, including convection capabilities that promote even heat distribution. This feature is particularly useful for baking and roasting, ensuring that meals are cooked to perfection.

Overall, the Kenmore 30 and 40 GAI Short models offer an impressive combination of features, technology, and design, making them an excellent choice for anyone looking to enhance their kitchen functionality. Whether you are updating your current setup or completely redesigning your space, these Kenmore appliances promise to deliver quality and reliability in every cooking endeavor.
Top Page Image Contents