Gas Piping

Chemical vapor corrosion of the flue and vent system may occur if air for combustion contains certain chemical vapors. Spray can propellants, cleaning solvents, refrigerator and air conditioner refrigerants, swimming pool chemicals, calcium and sodium chloride, waxes, bleach and process chemicals are typical compounds which are potentially corrosive.

Make sure the gas supplied is the same type listed on the model rating plate. The inlet gas pressure must not exceed 14 inch water column (3.5kPa) for natural gas. The minimum inlet gas pressure listed on the rating plate is for the purpose of input adjustment. If the gas control valve is subjected to pressures exceeding 1/2 pound per square inch (3.5kPa), the damage to the gas control valve could result in a fire or explosion from leaking gas.

If the main gas line shut-off serving all gas appliances is used, also turn “OFF” the gas at each appliance. Leave all gas appliances shut “OFF” until the water heater installation is complete.

A gas line of sufficient size must be run to the water heater. Consult the current edition of National Fuel Gas Code ANSI Z223.1/NFPA 54 and your gas supplier concerning pipe size.

There must be:

•A readily accessible manual shut off valve in the gas supply line serving the water heater, and

•A drip leg (sediment trap) ahead of the gas control valve to help prevent dirt and foreign materials from entering the gas control valve.

•A flexible gas connector or a ground joint union between the shut off valve and control valve to permit servicing of the unit.

Be sure to check all the gas piping for leaks before lighting the water heater. Use a soapy water solution, not a match or open flame. Rinse off soapy solution and wipe dry.

The minimum inlet gas pressure shown on the rating plate is that which will permit firing at the rated input.

If a standard model is installed above 2,000 feet (610 m) the input rating should be reduced at the rate of 4 percent for each 1,000 feet (305 m ) above sea level which requires replacement of the burner orifice in accordance with National Fuel Gas Code ANSI Z223.1/NFPA 54. Contact your local Sears Service Center or local gas supplier for further information.

Failure to replace the standard orifice with a high altitude orifice when installed at elevations above 2,000 feet (610 m) could result in improper and inefficient operation of the appliance, producing carbon monoxide gas in excess of safe limits, which could result in serious injury or death. Contact your local Sears Service Center or local gas supplier for any specific changes which may be required in your area.

The appliance and its gas connection must be leak tested before placing the appliance in operation.

153.338003, 153.338073 specifications

The Kenmore 153.338003 and 153.338073 are highly regarded models in the realm of home appliances, particularly known for their innovative features and reliable performance. Designed to cater to the evolving needs of modern households, these appliances seamlessly blend functionality with practicality.

Both models are equipped with advanced technology that enhances their efficiency and user-friendliness. The Kenmore 153.338003 and 153.338073 are designed with a focus on energy efficiency, utilizing cutting-edge materials and designs to minimize power consumption while maximizing performance. This not only helps households save on energy bills but also contributes to a more sustainable environment, making these models a responsible choice for eco-conscious consumers.

Key features of these models include a robust heating system and adjustable temperature controls that cater to various cooking needs. Users can easily set their desired temperature, ensuring that the appliance can handle a wide range of tasks, from baking to broiling. The inclusion of multiple cooking settings allows for versatile meal preparations, making it easy to tackle everything from quick snacks to elaborate dinners.

Another standout characteristic is the spacious interior, which provides ample room for cooking larger dishes. The layout is thoughtfully designed to maximize space while ensuring that heat distribution is even across all cooking surfaces. This ensures that meals are cooked thoroughly and uniformly, eliminating the common issue of uneven cooking.

Cleaning and maintenance have also been prioritized in these models. The exterior surfaces are crafted from durable, easy-to-clean materials, while the interior features non-stick coatings that facilitate hassle-free cleaning. Additionally, features such as removable trays and racks allow for simplified upkeep, ensuring that the appliance remains in top condition over time.

User-friendly interfaces are another highlight, with intuitive controls that allow users of all skill levels to operate these appliances with ease. Digital displays provide clear information on cooking times and settings, enhancing the overall cooking experience.

In summary, the Kenmore 153.338003 and 153.338073 stand out in the market due to their effective features, advanced technologies, and practical characteristics. They represent a blend of innovation and convenience, making them an excellent addition to any modern kitchen.