Kenmore 152.85254 owner manual Operation, Med, Filter Change Schedule, Filter Replacement

OPERATION cont.
oTURBO	initial Operation	Fastest	Cleaning
= HI	Maximum Operation	Fast Cleaning
• MED	Daytime Operation	Normal	Cleaning
• LO	Nighttime Operation	Quieter	Operation
FILTER CHANGE	SCHEDULE

Pre-Filter: The pre-filter should be changed every three (3) months or sooner, depending upon the level of the room's air contaminants and the frequency of use.

=HEPA Filter: The usable lifetime of the HEPA filter is 1 - 3 years, depending upon the level of the room's

air contaminants and the frequency of use. The air volume output will begin to decrease dramatically when the filter needs to be changed. You should have a spare filter available for later replacement.

FILTER REPLACEMENT

These filters are specially designed for easy replacement at maximum performance. THE FILTERS ARE NOT WASHABLE.

1.Turn the air cleaner OFF and unplug it from the power outlet.

2.Carefully lay the unit down on a flat surface with the Front Grille facing up.

3.Gently push in on Release Buttons on both sides of the unit and swing out the Front Grille.

4.Pre-Filter

•The pre-filter is attached to the HEPA filter frame with six adhesive pads. Detach pre-filter and discard it.

•Remove and discard any plastic protective wrapping from the new pre-filter.

•Lay pre-filter on HEPA filter and gently push it against adhesive pads to attach it to the HEPA frame.

5.HEPA Filter

, Remove and discard any plastic protective wrapping and packaging from the new HEPA filter.

oAttach a new pre-filter to the new HEPA filter frame see Pre-Filter attachment instructions above).

Note: Always install new pre=filter when changing HEPA filter.

•Place the filter assembly into the unit.

6.install the Front Grille by engaging its tabs into the bottom slots on the unit. Then swing grille up and gently push in top to snap into place.

5