Kenmore 116.36933, 116.36932 To Remove Dust BIN, Lift dust bin handle located at the top Dust bin

		Hold dust bin	DustBin
&WARNING	!	over a trash	Handle--_
		container.

Always unplug power cord from elec-	I
trical outlet before performing any ser-	J
vice on vacuum cleaner.	I
TO REMOVE DUST BIN
Lift dust bin handle located at the top of
the dust bin,,

Press the dust bin door

release button Door

downward to Release

release the Button door,

The door will

Handle

Dust - _

Bin

Pull the handle up

and lift dust bin up and out of the vac-

uum cleaner,

swing open and the debris

will fall into the

trash container_ Emptying

Door

Shake the dust bin to release any debris that might hang in the fiEterelement.

Remove any clogs that might be located in the suction port or filter port area,,

Note: See PRIMARY FILTER REMOVAL AND CLEANING section

empty of debris,

firmly close the door., Make sure

you hear a "dick" sound to indicate

_After the dust bin is that the door is fully

latched.

Door Door

Latch

TO EMPTY DUST BIN

Before removing debris from dust bin it is a good idea to move the dust bin filter clean- ing lever back and forth several times,

Moving the lever

back and forth Dust BIn_

Filter_,

loosens the dust Cleaning

and debris that Lever has attached

itself to the filter element inside the dust bin,

TO REPLACE

DUST BIN

Place dust bin back into vacuum cleaner by insertingthe bot-

tom first and tilting back with the dust bin

handle raised

Lower the dust bin handle to lock dust bin in )lace.

Rotate dust bin handle to the vertical posi- tion,,

_,noticeable "click" should be heard.

17