Kenmore 175.869039 manual When to Empty Recoverytank, To Emptyrecovery Tank

Page 7

WHEN TO EMPTY RECOVERYTANK

See Figure 9

During normal operation, your cleaner may stop recovering solution from your carpel When this occurs there are three check points to alert you:

1.An increase in motor noise.

2.No solution visibly being recovered by the floor nozzle.

3.No air coming from the exhaust port of your cleaner.

When this occurs:

1.The Recovery Tank is full and the Float Valve in the Recovery Tank has been activated. The Recovery Tank should be emptied.

--or

2.The Recovery Tank has foam in the Tank and the Float

Valve has been activated.

NOTE: If cleaner is accidently turned over while in operation, the float may activate and shut off the suction. If this occurs, set the cleaner upright. Turn Power Switch "OFF' and let motor come to a complete stop. Then turn switch back on and continue cleaning.

TO EMPTYRECOVERY TANK

See Figure I0

1.Turn Power Switch "OFF" and Disconnect Power Cord from Electrical Outlet.

2.Disconnect Short Cord located between Solution Tank and Recovery Tank.

3.Disconnect Vacuum Hose by depressing the Lock Button and remove.

4.Twist Solution Tube Quick DisconnectNut counterclock- wise; lift and remove from Quick Disconnect Valve (See DETAIL "A" ).

5.Lift Latches on Power Head.

6.Lift power Head, by Handle, and remove from Recovery

Tank.

7.Rotate Metal Latch on the Solution Tank and lift Recovery Tank from the Solution Tank.

8.Empty Recovery Tank.

9.Reassemble cleaner and resume cleaning. NOTE: Power Head is designed to go on in only one position. Make sure the word "VACUUM" on the Power Head is lined up directly over the Hose Inlet on Recovery Tank as shown in Fig. 10 or Power Head will not seal to unit properly.

W

EXHAUST

RECOVERY

PORT

TANK

 

LOCK BUTTON

VACUUM

HOSE

SOLUTION

QUICKTUBING

DISCONNECT DETAIL "A"

VALVE

POWER HEAD

HANDLE

RECOVERY

TANKALIGN

OVER

HOSE

INLET

SHORT

LATCH

SOLUTION

TANK

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Home Cleaning System Tabfor Tableof Contents Assemblyof HOSE, WANDS, Nozzleand Solution Tubing Assemblyof Recoverytank and Solution TankCarpetpreparation Cleaning SolutionPowercord and Switch Pump SwitchCleaning Thecarpet Testfor Solution SprayTo Emptyrecovery Tank When to Empty RecoverytankUpholsterynozzle To Emptythesolution TankFloortools See Finite DRY Floor Power NozzleKenmorespraymate Attachment Useas a BlowerTo Unclog Nozzleport ProblemPage Figurea Partslist =!/,,,J31 Searsdry Power NOZZLE-- Model SP-8I PS Kenmore

175.869039 specifications

The Kenmore 175.869039 is a versatile and reliable laundry appliance, designed to meet the needs of modern households. Known for its efficiency and performance, this washer provides a range of features that simplify the laundry process while delivering exceptional results.

One of the standout features of the Kenmore 175.869039 is its spacious capacity. With ample drum space, it can handle large loads, making it ideal for families or anyone who frequently washes bulk items like bedding or towels. The washer's design incorporates a high-efficiency motor that reduces energy consumption without sacrificing cleaning power. This means you can do more laundry in fewer cycles, saving both time and resources.

Equipped with advanced wash technologies, this model offers multiple wash settings and cycles to accommodate different fabric types and soil levels. From delicate items to heavily soiled work clothes, users can customize their wash experience to achieve optimal cleanliness. Additionally, the washer features a stainless steel drum, which is not only durable and resistant to chipping but also helps maintain a hygienic wash environment.

The Kenmore 175.869039 also emphasizes quiet operation, utilizing sound-dampening technology to minimize noise during the wash cycle. This is particularly beneficial for households where laundry is done at all hours or in close proximity to living areas.

Another key characteristic is its user-friendly interface. The control panel is designed for intuitive use, with easy-to-read settings and buttons that allow for quick adjustments. The machine also features a display that provides information on the remaining wash time, which helps users manage their schedules more effectively.

Additionally, this model includes a range of smart features, such as automatic load sensing, which adjusts water levels based on the size of the load, ensuring water efficiency and optimal cleaning performance. This not only conserves water but also enhances the washer's overall effectiveness.

Overall, the Kenmore 175.869039 stands out as a powerful and efficient laundry solution. Combining advanced washing technologies with user-friendly features and a durable build, it represents a smart investment for anyone looking to streamline their laundry routine while ensuring clean, fresh results.
Top Page Image Contents