Kenmore 153.320693 HT, 153.320492 HT Service and Adjustment, Temperature Regulation, Thermostats

Page 16

Service and Adjustment

Temperature Regulation

AWARNING

HOTTER WATER CAN SCALD: Water heaters are intended to produce hot water. Water heated to a tem- perature which will satisfyspace heating, clothes washing, dish washing, and other sanitizing needs can scald and permanently injure you upon contact. Some people are more likely to be permanently injured by hot water than others. These include the elderly, children, the infirm, or physically/mentally handicapped. If anyone using hot water in your home fits into one of these groups or if there is a local code or state law requiring a certain tem- perature water at the hot water tap, then you must take specialprecautions. In addition to using the lowest possi- ble temperature setting that satisfies your hot water needs, a means such as a mixing valve, shall be used at the hot water taps used by these people or at the water

heater. Mixing valves are available at plumbing supply or hardware stores. Follow manufacturers instructions for

installation of the valves. Before changingthe factory set- ting on the thermostat, read the "Temperature Regulation" sectionin this manual.

AWARNING]

Never allow small children to use a hot water tap, or to draw their own bath water. Never leave a child or handi-

capped person unattended in a bathtub or shower.

]

Thermostats

The thermostat(s) of this water heater have been factory set at

their lowest position which approximates 120°F (Hot) to reduce the risk of scald injury.

The upper thermostat is factory set at its lowest position which approximates 120°F (Hot) and is adjustable if a different water temperature is desired. Read all warnings in this manual and on the water heater before proceeding.

4

OI

UPPER THERMOSTAT ADJUSTABLE

BEHIND UPPER ACCESS PANEL

The lower thermostat is factory set at its lowest position which

approximates 120°F (Hot) and is adjustable if a different water

temperature is desired. Read all warnings in this manual and on the water heater before proceeding.

Temperature Settings

HOT-Is a thermostat setting of approximately 120°F, which will supply hot water at the most economi- ca] temperatures.

A-Is a thermostat setting of approximately 130°E

B-Is a thermostat setting of approximately 140°E

C-Is a thermostat setting of approximately 150°E

VERY HOT-Is a thermostat setting of approximately 160°E It

is recommended that the dial be set lower when-

ever possible.

NOTE: Water temperature range of 120°--140°Frecom- mended by most dishwasher manufacturers.

Upper Thermostat

Adjustment

NOTE: It is not necessary to adjust the upper thermostat. However, if it is adjusted above the factory set point of

120°F (HOT) it is recommended that it not be set higher than the lower thermostat setting.

The upper thermostat is adjustable if a different water tempera-

ture is desired. Read all warnings in the "Temperature- Regulation" section before proceeding.

1.Turn "OFF" the electrical power to the water heater at the junction box.

2.Take "OFF" the access panel.

3.The slotted adjustment (using a screwdriver) can be turned

clockwise (___.J) to increase the temperature setting or

counter clockwise (k.._.._) to decrease the temperature set- tmg.

4.Replace the access panel.

5.Turn "ON" the power supply.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Owners Safety Precautions Or Property DamageContents Product InstallationPreparing for the New Materials Needed Materials and Basic Tools NeededBasic Tools Installation Instructions Removing the Old Water HeaterInstallation Instructions contd DEATH. Serious Bodily INJURY. or Property DamageInstallation completed using Sears Installation Kit Water PipingTemperature-Pressure Relief ValveFilling the Water Heater Converting the Lower ElementAwarning Result in DEATH, Serious Bodily Injury or Property DamagePO%?TATTHs Property Damage Converting Lower Element contdNJURY, or Property Damage Wiring Diagrams To Electric Power SupplyWiring ScrewInstallation Checklist Model Rating PlateRelief Valve I6 AIR GAPService and Adjustment Temperature RegulationTemperature Settings Upper Thermostat Adjustable Behind Upper Access PanelService and Adjustment contd Temperature-Pressure ReliefLower Thermostat Adjustable Through Lower Access Panel TEMPERATURE-PRESSURE Relief ValveElement Cleaning Replacement Service and Adjustment Drain Valve Washer Replacement OUS BOD LY INJURY,OR Property DamageTroubleshooting Guide Start Up ConditionsThermal Expansion Strange SoundsTroubleshooting Guide contd Not Enough or no HOT Water Water is TOO HOTTroubleshooting Guide contd Leakage CheckpointsPage Page Page Parts Order List Parts Order List contd KEY Part DescriptionElement Ordering Information This is a Repair Parts LIST, not a Packing List About Your Warranty Sears Installation Policy

153.320592 HT, 153.320692 HT, 153.320893 HT, 153.320492 HT, 153.320892 HT specifications

Kenmore has long been synonymous with quality home appliances, and the Kenmore 153.320593 HT, 153.320492 HT, 153.320392 HT, 153.320393 HT, and 153.320493 HT models continue this tradition with their advanced features and technologies. These models are designed specifically for convenience, efficiency, and performance, catering to a variety of household needs.

One of the standout features of the Kenmore 153 series is its efficient heating technology, which ensures that water is heated quickly and evenly. This is essential for both cleaning and cooking applications, making it a versatile addition to any kitchen. The heating elements are designed for durability, promoting longevity and reducing the frequency of replacements.

These models also boast a user-friendly control panel, which simplifies operation. The intuitive design makes it easy for users to select their desired temperature and washing cycles. Furthermore, some units in this series are equipped with digital displays that provide real-time feedback on the appliance's operation, allowing homeowners to monitor performance at a glance.

Energy efficiency is another hallmark of the Kenmore 153 series. With the rising concerns about energy consumption, these models incorporate technology that minimizes electrical usage without sacrificing performance. This not only aligns with sustainability goals but also helps homeowners save on their energy bills.

Another impressive characteristic of the Kenmore 153 models is their built-in safety features. Overheat protection and automatic shut-off mechanisms are standard across the series, ensuring peace of mind when the appliance is in operation. These safety measures are particularly valuable in households with children or pets.

In terms of design, the Kenmore models reflect a modern aesthetic, with sleek finishes that complement a variety of kitchen decors. Their compact size ensures that they fit seamlessly into limited spaces, making them ideal for both small apartments and spacious homes.

Additionally, the durable construction of these appliances is designed to withstand the rigors of daily use. The materials used are resistant to wear and tear, ensuring that the units maintain their functionality and appearance over time.

Overall, the Kenmore 153.320593 HT, 153.320492 HT, 153.320392 HT, 153.320393 HT, and 153.320493 HT models represent a blend of innovation, practicality, and style. With their advanced features, energy efficiency, and commitment to safety, these appliances stand out as an excellent choice for those seeking dependable performance in their everyday tasks.
Top Page Image Contents