Pantech WV-NW474S Precautions, Handle the camera with care, Never face the camera towards the sun

Page 7

PRECAUTIONS

1.This product should be installed and connected in conformity with NEC by qualified service per- sonnel or system installers.

2.Use a class 2 power source supplying 24 V AC.

3.To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) to connect the power supply to the camera.

4.Be sure to use a ceiling board/wall having enough strength to support this camera.

5.Do not attempt to disassemble the camera.

To prevent electric shock, do not remove screws or covers.

There are no user-serviceable parts inside. Ask a qualified service personnel for servicing.

6.Handle the camera with care.

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage.

7.Do not use strong or abrasive detergents when cleaning the camera body.

Use a dry cloth to clean the camera when it is dirty. When the dirt is hard to remove, use a mild deter- gent and wipe gently. Care should be taken not to scratch the dome cover when wiping it.

Wipe off any remaining detergent in it with a dry cloth.

8.Never face the camera towards the sun.

Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.

9.Never aim the camera at strong light sources for an extended period of time.

A light source such as a spot light causes burn-in on the display screen. Failure to observe this may cause the image to become discolored due to dete- rioration of the color filter in the CCD.

10.Do not operate the camera beyond the specified temperature, humidity or power source ratings. Do not use the camera in an extreme environment where high temperature or high humidity exists. Do not place the camera near heat sources such as radiators, stoves or other units that produce heat. Use the camera under conditions where tempera- tures are between –10 °C and +50 °C (14 °F to 122 °F) and humidity is below 90 %.

The input power source is 24 V AC 60 Hz.

11.Do not install the camera near the air outlet of an air conditioner.

The lens may become cloudy due to condensation if the camera is used under the following conditions.

•Rapid temperature fluctuations by switching the air conditioner on and off.

•Rapid temperature fluctuations due to frequent opening and closing of a door.

•Use in an environment where eyeglasses become foggy.

•Use in a room filled with cigarette smoke or dust. If the lens becomes cloudy due to condensation, remove the dome cover and wipe all moist surfaces with a soft cloth.

When installing, be sure to wipe off water drops and splashes inside the camera. Failure to do so may cause condensation.

12.Do not aim the camera at the same object for a long time.

Burn-in of an image may be caused on the fluores- cent screen of the CRT.

•Matsushita Electric Industrial Co., Ltd. herewith declares that it will not be liable for any damage, whether direct or indirect, caused by using the product for business transactions or security, or malfunctioning of this product.

-7-

Page 6 Page 8
Image 7
Page 6 Page 8
Contents WV-NW474S For Canada Important Safety Instructions Contents Trademarks FeaturesPreface System RequirementsDocument Convention Do not aim the camera at the same object for a long time PrecautionsHandle the camera with care Never face the camera towards the sunMajor Operating Controls & Their Functions @4Power cable 8DIP switch@2Video output connector @3Control connectorProcurement InstallationInstallation Plans & Preparations Installation spaceMounting the Camera Mounting the CameraDisassembling the Camera Optional Heater UnitConnections Power ConnectionWire colors & functions Cable length and wire gaugeNetwork Port Connection Image AdjustmentControl Connector Video Output ConnectionWaterproof Process Connection to Intranet Type Network Connection TypesDirect Connection to PC Type Connection to Internet TypePage Camera Setup Procedures Preparations for Network Connections Network Setup of Your PCUsing Panasonic IP Setup Software Network Setup of the CameraDNS Dhcp DNS Using Network Setup MenuDdns Page Connection type Parameter description Network Setup Parameters vs. Connection TypeDhcp Dhcp server assigns an IP address to the camera automatical Click on if the router uses Dhcp Buttons Used for Setup Prior to Camera SetupCamera Setup Menus ¡From the Camera Setup Menu Tree Camera Identification Camera ID Setting Setting ProceduresSetup Selection Camera Setup Menu CAMTo replace a specific character in the Camera ID Light Control Setting ALCCommand Usage To edit the Camera IDShutter Speed Setting Shutter Gain Control Setting AGC on DNR-L, DNR-H/OFFElectronic Sensitivity Enhancement Sens UP ATW1 Auto-Tracing White Balance Synchronization Setting SyncPush SW Motion Detector Setting Motion DETAutomatic White Balance Control Mode AWC Manual Fine Adjustment for AWC ATWSpecial Menu Special Menu/DIP SW Selection10-7. BW To reset to the factory settings Camera ResetHttp Port Number Network Setup Network SetupMultiscreen Setup PC Oriented Setup ProceduresNetwork Setup Image SetupAlarm Setup FTP Client Setup User Setup Host Setup MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD System SetupManual Time Adjustment Time Adjustment by NTPOperating Procedures Initializing Html Files Initializing the Setup MenuInitializing Initializing the Camera MenuOperating from System Devices Operating the CameraOperating from the PC Viewing Pictures Preparations for Network AccessMain Window Windows ExplanationCamera Adjustment Window Multiscreen Window Still Picture Storage to the PC6AUX buttons When an Alarm Arises Alarm FunctionsTransferring Picture Files Canceling Alarm DisplayVMD Setup Detection Area SetupPage Reviewing Alarm Pictures Resetting Alarm Description indication type etc Customizing Alarm Notice E-MailUser Name admin Password None Step StepTroubleshooting Network Section SpecificationsTCP/IP, HTTP, FTP, SMTP, DNS, DDNS, DHCP, ARP, BOOTP, NTP Prevention of Blooming and SmearWV-CW2C Standard AccessoriesOptional Accessories GeneralOptional Heater Unit WV-CW3H SpecificationsAccessories AppendixPanasonic Digital Communications & Security Company

WV-NW474S specifications

The Pantech WV-NW474S is a remarkable smartphone that stands out in the competitive landscape of mobile technology. Launched as part of Pantech's lineup, this device integrates a range of features and technologies designed to cater to modern user demands while providing an appealing user experience.

One of the most distinguished characteristics of the WV-NW474S is its vibrant display. The device is equipped with a large LCD screen that offers bright visuals and rich colors, ideal for streaming videos, browsing photos, and engaging with apps. The screen resolution ensures clarity, making every detail pop, which is essential for multimedia consumption.

The WV-NW474S is powered by a robust processor, ensuring smooth performance across various applications. Whether you are multitasking between social media, games, or productivity tools, the device handles it seamlessly, thereby enhancing efficiency for users. Coupled with an ample amount of RAM, this smartphone ensures applications load quickly and run without lag.

In terms of storage, the WV-NW474S offers generous internal storage that meets the needs of most users. This space allows for a substantial number of apps, photos, videos, and documents, enabling users to have their essential files on hand without the need for frequent data management. Additionally, the inclusion of a microSD card slot provides the flexibility to expand storage, accommodating larger files or additional apps.

The camera system on the Pantech WV-NW474S is noteworthy. It features a high-resolution rear camera capable of capturing stunning images and videos. With advanced imaging technology, users can expect clear, professional-quality photos even in low-light conditions. The front-facing camera is also equipped for high-definition selfies and video calls, making it perfect for social interactions.

Connectivity is another area where the WV-NW474S excels. The smartphone supports various network technologies, including 4G LTE, ensuring fast and reliable internet access. Additionally, the device is equipped with Wi-Fi and Bluetooth capabilities, making it convenient to connect to other devices and networks.

Battery life is a crucial aspect of any smartphone, and the WV-NW474S does not disappoint in this regard. With a powerful battery, users can enjoy extended usage without the need for frequent recharging, ideal for those with busy lifestyles.

In conclusion, the Pantech WV-NW474S encapsulates a blend of performance, innovation, and user-friendly features. With its vibrant display, powerful processor, ample storage, high-quality cameras, and robust connectivity options, this smartphone promises to meet and exceed the expectations of contemporary users. Whether for work or leisure, the WV-NW474S proves to be a reliable companion in the ever-evolving landscape of mobile technology.
Top Page Image Contents