Radio Shack RS-4000 installation manual Introduction

Page 2

49-840in.fm Page 2 Thursday, August 19, 1999 10:47 AM

INTRODUCTION

This installation manual guides you through the steps you will take to in- stall your alarm system. It includes a checklist that keeps you on track and a master wiring diagram that provides an overview of the installation.

Plus, this manual has specific, de- tailed instructions that tell you how to first find connection points, and then how to connect all wires.

Refer to the separate Operation Man- ual to understand each of your alarm’s features and to see how to operate your alarm.

Since there are many different makes and models of cars, it is impossible for this manual to cover every wiring configuration. Instead, this manual gives you ways to determine the wir- ing configuration for your vehicle yourself.

We recommend you read through this entire manual first to be sure there will be no surprises during installa- tion. We have included all the mount- ing hardware you need for installation. However, you need these supplies.

•12-volt test light or volt meter

•Masking tape and a pen

•Wire Piercing Probe Adapters (RadioShack Cat. No. 278-715)

In addition, it would be a good idea to have the following on hand:

•Spare vehicle fuses

•Spare wire tap-ins and 14-gauge hookup wire (in case a wire does not reach where it needs to reach), available at your local RadioShack store

If you have trouble during installation, help is just a toll-free call away. Call the Auto Alarm Helpline anytime at:

1-800-598-2527

if you have any questions or prob- lems.

Warnings:

•This system produces extremely loud (120 dB) alerts when trig- gered. Extended, close-range exposure to the siren can be painful and might damage your hearing.

•Allow at least 4 to 6 hours for a complete installation. Be sure you have all required supplies before you begin. This installation could require removing door panels and dash access panels, and using a test meter or test light to deter- mine proper installation methods.

(Open for Checklist)

©1997 Tandy Corporation.

All Rights Reserved.

RadioShack is a registered trademark used by Tandy Corporation.

2

Need Help? Call 1-800-598-2527

Page 1 Page 3
Image 2
Page 1 Page 3
Contents RS-4000 Auto Security Alarm System Installation ManualIntroduction Time ChecklistAfter you complete this section Estimated Contents Before YOU Begin the Installation Status Indicator with Bracket and GrommetUsing Wire Piercing Probe Adapters Type C Switch Test InstallationDetermining Your VEHICLE’S Power Door Lock Type Type a Switch TestFailed All Tests Determining Your VEHICLE’S Door Switch Power TypeType B Switch Test Finding the Starter Wire Finding Your VEHICLE’S Parking Lights Wire Finding Constant and Ignition Power Using Wire TAP-INSInstalling the Status Indicator Mounting the Main ModuleMounting and Connecting the Siren Mounting and Connecting the ANTI- Carjacking Switch Connecting to PowerConnecting the Starter Disable Module Connecting Additional Sensors Connecting to Power Door LocksConnecting to the Door Switch Connecting to the Parking LightsCompleting Installation Connecting Accessory DevicesSpecifications Volts Max Volts Min Source mA Load mA, MaxMaster Wiring Diagram 49-840in.fm Page 19 Thursday, August 19, 1999 1047 AM RadioShack Division of Tandy Corporation Fort Worth, Texas

RS-4000 specifications

The Radio Shack RS-4000 is an iconic piece of technology that embodies the spirit of innovation in the consumer electronics industry during the late 20th century. Launched in the 1980s, this personal computer made a significant impact on the home computing landscape, appealing to hobbyists, educators, and early computer enthusiasts alike.

One of the standout features of the RS-4000 was its affordability, which made technology accessible to a broader audience. The computer was powered by a Zilog Z80 microprocessor, a popular choice at the time due to its reliable performance and efficiency. With a clock speed of 4 MHz, the RS-4000 provided basic computing capabilities that were sufficient for word processing, simple programming, and educational software.

The RS-4000 came with 64 KB of RAM, expandable up to 256 KB, allowing users to enhance the system’s performance as their needs grew. For data storage, the computer utilized an external cassette tape interface, which was a common method for saving and loading programs during that period. This tape system was ultimately replaced as technology progressed, but it represented a significant step forward in personal computing.

Another notable aspect of the Radio Shack RS-4000 was its comprehensive range of input and output options. The machine featured basic keyboard input, a built-in speaker for sound output, and compatibility with various peripherals, including printers and modems. Additionally, it provided both video output to standard television sets and the option for users to connect external monitors, bringing versatility to the display options.

The RS-4000 supported a variety of programming languages, including BASIC, which allowed users to delve into programming and develop their software applications. This capability contributed to the rise of a generation of computer coders and technology enthusiasts who would go on to shape the digital future.

In summary, the Radio Shack RS-4000 was more than just a computer; it was a catalyst for creativity and innovation during the formative years of personal computing. With its user-friendly design, expandability, and a growing library of software, the RS-4000 played a crucial role in helping individuals understand and embrace the digital age. Although technology has advanced significantly since its release, the legacy of the RS-4000 remains in the hearts of those who experienced it, marking a pivotal moment in the evolution of personal computers.
Top Page Image Contents