Installation Checklist, Mounting System

49-810.fm Page 6 Thursday, August 19, 1999 10:07 AM

INSTALLATION

CHECKLIST

You can install your system in just three easy steps:

1.Mount the system.

2.Connect the system to power.

3.Train the remote control.

MOUNTING THE

SYSTEM

Select a location for your alarm sys- tem in the engine compartment. For the best results, the location should meet the following conditions.

•All wires should reach their con- nections without going near mov- ing or hot engine parts.

Note: If necessary, you can extend the wires using hook-up wire and butt connectors. Use at least 18-gauge wire and an insu- lated wire connector to extend a wire.

•The mounting location should be solid and have no mechanisms or moving parts behind it.

•For the best remote range, the mounting location should allow the system’s yellow antenna wire to hang straight down.

•For the loudest siren, the siren horn should point down toward the pavement.

•The alarm should not point straight up, as moisture could col- lect in the siren horn and damage the system.

•To prevent water damage, the system should not be mounted in a wheel well, directly behind the radiator grill, or close to the ground.

Once you select a location, follow these steps to mount the system.

1.Hold the system against the selected location and mark the locations of the three mounting holes.

2.Drill 1/8-inch holes at the marked locations, taking care not to drill into anything behind the mount- ing surface.

3.Secure the system to the surface using the supplied screws.

Note: For the shock-sensor to operate properly, you must use all three screws.

6	Need Help? Call 1-800-598-2527

RS-1000 specifications

The Radio Shack RS-1000, introduced in the early 1980s, stands as a testament to the evolution of personal computing during that era. As an entry-level microcomputer, it aimed to bring computing power into the hands of hobbyists and those new to technology. The RS-1000 was particularly noteworthy for its affordability, making it accessible to a broader audience.

One of the standout features of the RS-1000 was its Zilog Z80 processor, which operated at a speed of 1.77 MHz. The Z80 was known for its efficiency and was a popular choice among many other early computer systems, allowing the RS-1000 to run basic programs and rudimentary software with relative ease. Coupled with 16KB of RAM, the system provided enough memory for users to engage in programming and basic applications.

The RS-1000 supported a unique BASIC programming language, which became an essential tool for learning to code. The ability to write and run programs in BASIC on this machine allowed many users to hone their programming skills and explore their creativity through technology. Additionally, the RS-1000 came equipped with a built-in keyboard and a small monochrome display, which facilitated ease of use and functionality.

Storage was primarily managed through cassette tapes, a common medium for data preservation at the time. Users would connect their tape recorders to save and load their programs, making data management both straightforward and budget-friendly.

Another characteristic that endeared the RS-1000 to its users was its expandability. The system offered a range of peripherals and expansion options, including additional memory upgrades and disk drives. This allowed enthusiasts to customize their systems according to their needs and grow their capabilities over time.

Despite the rapid advancements in technology and the eventual decline of the original model, the Radio Shack RS-1000 remains a cherished memory for many early computing enthusiasts. Its combination of affordability, ease of use, and expandability laid the groundwork for countless users to embark on their computing journeys. The RS-1000 stands as an emblematic piece of computing history, reflecting a significant period in the democratization of technology.