NETGEAR GS524T manual Installation, Preparing the Site, Checking Package Contents

Page 17

CHAPTER 4: INSTALLATION

This chapter describes the installation procedures for the NETGEAR Model GS524T Copper Gigabit Switch.

Preparing the Site

Before you begin installing your switch, prepare the installation site. Make sure your operating environment meets the operating environment requirements of the equip- ment listed in Table 4-1.

Table 4-1. Operating Environment Requirements

Characteristic

Requirements

Temperature

Ambient temperature between 0 and 40ºC (32 and 104ºF).

 

No nearby heat sources such as direct sunlight, warm air exhausts, or heaters.

 

 

Operating humidity

Maximum relative humidity of 90%, noncondensing.

 

 

Ventilation

Minimum 2 inches (5.08 cm) on all sides for cooling.

 

Adequate airflow in room or wiring closet.

 

 

Operating conditions

At least 6 ft (1.83 m) to nearest source of electromagnetic noise

 

(such as photocopy machine or arc welder).

Power

Adequate power source within 6 ft (1.83 m).

Checking Package Contents

Unpack the contents of the package and verify them against the following list:

NETGEAR Model GS524T Gigabit Ethernet Switch

Self-adhesive rubber footpads for desktop installation

Rack Mount Kit for rack installation

AC power cord

Warranty & Owner Registration Card

installation 4-1

Image 17
Contents GS 524T Statement of Conditions TrademarksCertificate of the Manufacturer/Importer Voluntary Control Council for Interference Vcci StatementEN 55 022 and EN 55 024 Statements Internet/World Wide Web Customer SupportContents Cabling Guidelines Technical SpecificationsConnector Pin Assignments Figures Tables Introduction FeaturesPackage Contents Front Panel Physical DescriptionAuto Uplink RJ-45 PortsModel GS524T LED Descriptions LEDsRear Panel Applications Desktop SwitchingModel GS524T Switch Used as a Segment Switch Preparing the Site InstallationChecking Package Contents Connecting Devices to the Switch Installing the Switch on a Flat SurfaceInstalling the Switch in a Rack Connecting to the Model GS524T Switch Verifying InstallationTroubleshooting Information TroubleshootingSwitch Integrity ConfigurationNetwork Adapter Cards Auto NegotiationPerformance Specifications Appendix a Technical SpecificationsNetwork Protocol and Standards Compatibility Data CodingInput Voltage Power Adapter Physical Specifications Power ConsumptionEnvironmental Specifications InterfaceSafety Agency Approvals RJ-45 Plug and RJ-45 Connector Appendix B Connector PIN AssignmentsPin Channel Description Length Appendix C Cabling GuidelinesCabling Near End Cross Talk Next Return LossFast Ethernet Cable Guidelines Patch CablesConclusions Table C-1. Electrical Requirements of Category 5 Cable Category 5 Cable SpecificationsCategory 5 Cable Figure C-1. Straight-Through Twisted Pair Cable Twisted Pair Cables for 100 BASE-TXPatch Panels and Cables Cabling guidelines NETGEAR, Inc

GS524T specifications

The NETGEAR GS524T is a next-generation 24-port gigabit Ethernet smart switch designed to meet the demanding needs of small and medium-sized businesses. This robust device combines advanced features with exceptional performance, enabling efficient network management and enhanced connectivity.

One of the standout features of the GS524T is its 24 Gigabit Ethernet ports, providing high-speed connectivity for numerous devices. Each port supports auto-sensing, which allows for seamless integration with a variety of network devices, including computers, printers, and IP phones. This switch is equipped with a total switching capacity of 48 Gbps, ensuring minimal latency and reliable data transmission even under heavy traffic conditions.

The GS524T supports managed features that enable users to configure, manage, and monitor their network efficiently. With support for VLANs (Virtual Local Area Networks), users can segment their networks to enhance security and performance. This feature is particularly beneficial for businesses looking to isolate sensitive data from general user traffic. Additionally, the switch supports LAG (Link Aggregation Group) for increased bandwidth and redundancy.

Quality of Service (QoS) features further enrich the functionality of the GS524T. By prioritizing different types of traffic, the switch ensures that critical applications receive the necessary bandwidth to operate smoothly. This is essential for businesses that rely on real-time applications like VoIP and video conferencing, where delay and jitter can significantly impact performance.

Moreover, the GS524T supports IGMP Snooping, which optimizes multicast traffic and minimizes unnecessary network load. The ability to manage multicast streams is vital for businesses that utilize streaming media or video distribution.

In terms of security, the GS524T offers features such as port security and access control lists (ACLs), providing administrators with tools to safeguard their networks against unauthorized access. These features are crucial in maintaining a secure environment, especially as cyber threats continue to evolve.

In summary, the NETGEAR GS524T is a feature-rich and versatile smart switch that caters to the needs of modern businesses. Its extensive port availability, managed capabilities, QoS support, and robust security features make it an ideal choice for organizations aiming to optimize their network performance and security. Whether for expanding workgroups or connecting various devices within a busy office environment, the GS524T is equipped to handle the challenges of today's networking landscape efficiently.