Kicker S10X RemovalMountingAssembly, InternationalWarranty, VersiónEspañol, DeutscheVersion

Wood Template

RemovalMountingAssembly (Continued)

Please follow these instruction to insure proper installation.

Use a jigsaw or router to cut the woofer cutout. Use a 5/16 or 11/32” (8 - 8.8mm) drill bit for the mounting holes. See Figure 11.

Note: The following steps require the assistance of another person.

Figure 11

Figure 12

Enclosure Baffle

SPLAT

Insert the SPLAT into the cutout (inside the enclosure) and move it into

position. See Figure 12.

Figure 19

Fit the SPAIR to the BAM with the 10-24 Acorn Head Bolts. We have enclosed four (4) extra Acorn Head Bolts. See Figure 18.

7

Hand tighten the 10-24 Acorn Head Bolts in the order shown in Figure 19. Then use a wrench or socket driver to 4

securely fasten the bolts. This will ensure a proper fit and alignment.

Figure 18

1 5

3

8

6 2

WARRANTY		Use masking tape to temporarily		Enclosure Baffle
		hold the SPLAT in place inside
			the enclosure. This will be		SPLAT	Masking
		necessary for securing the BAM.
	Inside the					Tape
Enclosure		This tape can be removed after
					Inside the
	Enclosure
Baffle			the corner fastening		Enclosure
			hardware has been installed.
			See Figure 13.			Figure 13
		Enclosure Baffle
Machine		BAM	SPLAT
Screws			With the help of an assistant, insert the BAM and start
10-24
			fastening the corner hardware. Remove the masking tape.
			Tighten the Phillips Head Machine Screws to secure the
			BAM to the enclosure			Figure 15
			baffle. See Figure 14.		SPAIR	Connect
Enclosure						Speaker
		Figure 14				Cable
Baffle						Wires
Pull the speaker cable wires (used to connect the subwoofer to the
amplifier) through the BAM and connect them to the SPAIR’s
Binding Posts. The Locator Pin and Locator Hole will properly align
	Remove		the SPAIR to the BAM.
SPAIR	Gap Cap		See Figure 15.		Locator Hole	BAM

Locator Pin

Enclosure

Baffle

A Note on PowerHandlingCapacity SoloX subwoofers will handle massive amounts of power in any of the

recommended enclosures, minimum or maximum. The smaller enclosures are best for use in limited-space

applications. The larger recommended enclosures will yield more bass at the resonate frequency of the enclosure.

The listed Power Handling capacities assume that both voice coils are in use with the appropriate sub-sonic/resonate

frequency filter. Always connect both coils in a dual voice-coil speaker.

InternationalWarranty

Contact your International Kicker dealer or distributor concerning specific procedures for your country's warranty policies.

WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at the same volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently damage your hearing. Please use common sense when controlling volume.

GARANTÍA INTERNACIONAL VersiónEspañol

Comuníquese con su concesionario o distribuidor Kicker internacional para obtener infor ación sobre procedimientos específicos relacionados con las normas de garantía de su país.

ADVERTENCIA: Los excitadores Kicker son capaces de producir niveles de sonido que pueden dañar permanentemente el oído. Subir el volumen del sistema hasta un nivel que produzca distorsión es más dañino para el oído que escuchar un sistema sin distorsión al mismo volumen. El dolor es siempre una indicación de que el sonido es muy fuerte y que puede dañar permanentemente el oído. Sea precavido cuando controle el volumen.

INTERNATIONALE GARANTIE	DeutscheVersion
Nehmen Sie mit Ihren internationalen Kicker-Fachhändler oder Vertrieb Kontakt auf, um Details über die
Garantieleistungen in Ihrem Land zu erfahren.		GARANTIE
WARNUNG: KICKER-Treiber können einen Schallpegel erzeugen, der zu permanenten Gehörschäden führen kann!
Wenn Sie ein System auf einen Pegel stellen, der hörbare Verzerrungen erzeugt, schadet das Ihren Ohren mehr, als ein
nicht verzerrtes System auf dem gleichen Lautstärkepegel. Die Schmerzschwelle ist immer eine Anzeige dafür, dass
der Schallpegel zu laut ist und zu permanenten Gehörschäden führen kann. Seien Sie bei der Lautstärkeeinstellung

	Remove the Gap Cap before
	inserting the SPAIR.
	See Figure 16.
BAM	Carefully insert the SPAIR back into
	the BAM; do not damage the voice
Figure 16	coil. The Locator Pin on the BAM and
Enclosure	the Locator Hole in the SPAIR must

Baffle line up. The ARCTIC (Aluminum Rapid Cooling Thermal Induction Centering)

Cap, located on the top of the extended pole piece of the SPAIR, will help to center the SPAIR as you lower it into the BAM. When properly aligned these assemblies easily slide together. See Figure 17.

Enclosure

SPAIR Baffle

Locator

Hole

Locator Pin BAM

Figure 17

bitte vernünftig!

GARANTIE INTERNATIONALE VersionFrançaise

Pour connaître les procédures propres à la politique de garantie de votre pays, contactez votre revendeur ou distributeur International Kicker.

AVERTISSEMENT: Les haut-parleurs Kicker ont la capacité de produire des niveaux sonores pouvant endommager l'ouïe de façon irréversible ! L'augmentation du volume d'un système jusqu'à un niveau présentant une distorsion audible endommage davantage l'ouïe que l'écoute d'un système sans distorsion au même volume. Le seuil de la douleur est toujours le signe que le niveau sonore est trop élevé et risque d'endommager l'ouïe de façon irréversible. Réglez le volume en faisant prevue de bon sens !

6SOLOXSUBWOOFER

P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • (405) 624-8510 03062007+07SOLOX

7