Aiming, Installation, Testing | Ace Hardware 3209574 instruction

Motion Sensing

2. Aiming

Light

The coverage area for the sensor is shown in Figure 2. The sensor should be aimed so that the motion to be detected is in front of and across the coverage area. The sensor should be aimed looking out at a horizontal angle. To reduce false triggering, point the sensor away from trafﬁc areas, air conditioners, dryer vents, water pools, or anything which may move or change temperature rapidly.

Model 3108685 / 3209574

Note:Installation of this light control should be done only by those with experience in 120 Volt household wiring. Some local codes may require that a licensed electrician install the light control.

1. Installation

Caution: Always turn the circuit breaker off when wiring the ﬁxture.

1.Remove the existing ﬁxture.

2.Knockout the mounting plate holes needed to mount the sensor on the junction box.

3.Connect the light control as shown in Figure 1:

•Black sensor wire to the black (HOT) house wire.

•White sensor wire to the white (NEUTRAL) house wire.

Black to black

White to white

From House

Connect the ﬁxture ground wire to the junction box ground wire.

Figure 1 - Wiring at Junction Box Plate

4.Attach the junction box cover plate to the junction box. Use a weatherproof sealant to seal the plate to the junction box.

5.Adjust ﬁxture. The lamp head should be at least 1 inch away from the sensor.

The sensor must be mounted below the lamp housing for wall installations.

Caution: Do not mount the sensor above or touching the lamp (keep 1 inch or more from the lamp). The sensor bottom must be facing down for best coverage and to avoid water damage and electrical shock.

CAUTION: To Avoid Fire Or Burn Hazards:

•Allow ﬁxture to cool before touching. The bulb and the ﬁxture operate at high temperatures.

•Keep ﬁxture at least 1" from combustible materials. Do not aim at objects closer than 3 ft.

•Use only T3, 150 Watt (Maximum) tungsten halogen 120 VAC lamps.

Note: For under-eave installation, rotate the sensor head 180° by bending the sensor towards the clamp bracket. Rotate the sensor bottom clockwise away from the bracket.

110°

8 Ft.

60 Ft.

Figure 2 - Coverage Angles

3. Testing

Turn the power back on at the circuit breaker. Turn the light switch on.

Note: When ﬁrst turned on wait about 1 1/2 minutes for the circuitry to calibrate.

Put the TIME switch on the bottom of the sensor in the TEST position. You can now walk in front of the unit and the lights will come on for about 5 seconds. The TEST mode works both day and night.

Walk through the coverage area and point the sensor to obtain the desired coverage area. Adjust sensitivity as needed.

4. Operation

For motion sensing, put the ON-TIME switch on the bottom of the sensor in the 1, 5, or 10 minute position. When motion is detected, the lights will come on the selected time. Note: The photocell keeps the lights from turning on in daylight.

To keep lights on all night, ﬂip the light switch off for 1 second then back on. Turning the light switch off for 1 second, then back on again will return the control to the motion sensing mode. At dawn, the control will reset to the motion sensing mode and shut off.

This light control automatically turns the light on when motion is detected.

Speciﬁcations:

Total Lighting Wattage	Up to 150 Watts Maximum
Range	Up to 60 ft.
Time Delay	1, 5, or 10 minutes
Replacement lamp	T3, Up to 150 Watt Maximum
	halogen 120 VAC

Caution: This product is to be used with a U.L. listed rain tight or wet location suitable outlet box. Depending on the installation, additional hardware may be required.

595-5753-05

3108685, 3209574 specifications

Ace Hardware has long been a trusted name in the do-it-yourself retail space, providing customers with a wide variety of products essential for home improvement and maintenance. Among its extensive range of offerings, Ace Hardware locations boast unique store numbers, such as 3108685 and 3209574, which some customers may encounter during their shopping experiences. These stores are equipped with exciting features that make them stand out within the Ace Hardware network.

One of the main characteristics of Ace Hardware stores, including locations 3108685 and 3209574, is the emphasis on community engagement and personalized customer service. Ace locations strive to create a welcoming atmosphere where staff members are knowledgeable and equipped to assist customers with their projects. This customer-centric approach has garnered a loyal following, with shoppers returning for advice on everything from tool selection to home décor solutions.

The technology utilized in these Ace Hardware stores enhances the shopping experience significantly. Many locations employ point-of-sale systems that expedite transactions and facilitate inventory management. Additionally, stores are increasingly leveraging mobile applications to connect with customers, offering features such as digital coupons, rewards programs, and access to product information. This integration of technology not only streamlines operations but also provides customers with up-to-date information on product availability and location within the store.

Ace Hardware is also committed to sustainability and eco-friendly practices. Stores like 3108685 and 3209574 may offer a range of environmentally friendly products, from paints with reduced volatile organic compounds (VOCs) to luminaire options that are energy-efficient. The commitment to sustainability resonates with customers who are increasingly conscious of their environmental footprint.

Moreover, these stores have dedicated sections for specific home improvement categories, including hardware, plumbing, electrical, and outdoor living. This organization makes it easier for customers to find the items they need, whether they are embarking on a significant renovation or a simple repair job.

Ultimately, Ace Hardware locations 3108685 and 3209574 embody the brand's overarching mission to empower customers with the tools and knowledge they need to tackle home improvement projects confidently. They are more than just hardware stores; they are community hubs where DIY enthusiasts can find inspiration, support, and high-quality products tailored to their needs.